J-B Weld
50132
J-B Weld 50132 PlasticWeld Quick-Setting Epoxy Syringe - Dries Translucent Yellow - 25 ml
EAN: 6935743366608
UPC: 043425501325
Adhesives & Glue
Translucent yellow drying epoxy sets in 5 minutes and cures in 1 hour
Great for most hard plastics, ABS, fiberglass, pvc, glass, vinyl and most composites
Tensile strength of 4400 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
J-B Weld PlasticWeld Syringe
PlasticWeld is a specially formulated two-part adhesive and epoxy filler system that provides for strong, lasting repairs. PlasticWeld will bond a variety of surfaces, such as metal, composites, fiberglass and others. PlasticWeld sets in 5 minutes at room temperature and is fully cured in 1 hour. Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of 4400 PSI and cures to a translucent yellow color.
Use on:
Instructions
1. Prepare: Clean repair area of dirt, grease, oil, paint, rust, etc.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 25 ml
J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml
J-B Weld 50112 ClearWeld Quick-Setting Epoxy Syringe - Dries Clear - 25 ml
J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml
J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.
McQuay-Norris FA1486 Ball Joint Assembly
1983 1987 Corolla Coilover D2 Racing D-TO-02-CS
Mix me 2989