J-B Weld
50112
J-B Weld 50112 ClearWeld Quick-Setting Epoxy Syringe - Dries Clear - 25 ml
EAN: 0971500102610
UPC: 044111320237
Adhesives & Glue
Crystal clear epoxy sets in 5 minutes and cures in 1 hour
Great for tile, most plastics, ceramic, glass, wood, metal and more
Tensile strength of 4400 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
J-B Weld ClearWeld Syringe
ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 4400 PSI, ClearWeld sets to a hard, permanent bond.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 5 minutes. Cures in 1 hour. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
Hopkins 48425 6 Pole Round Vehicle Connector
Tow Ready 118037 Metal Trailer End 6-Way Flat Pin Connector
DIGITEN 19mm Waterproof Stainless Steel Blue 12V LED Button Switch Push ON/OFF car boat
J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.
MICTUNING LED Illuminated Automotive Blade Fuse Holder Box 6-Circuit Fuse Block with Cover
Carolina Crank & Core 1-5096 Remanufactured Crankshaft
Andrews Harley Davidson 2000 13 Sportster 298130
Mix me 1226