J-B Weld
50133
J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Dries Tan - 25 ml
EAN: 6935743366615
UPC: 799916133628
Adhesives & Glue
Tan drying two-part urethane adhesive sets in 15 minutes and cures in 30 minutes
Great for filling dents, bumpers, trim, polypropylene and polyethylene plastics, fiberglass and more
Tensile strength of 3770 PSI for a strong, permanent bond
No mess, no waste cap screws on one way to eliminate accidental mixing and ensure it won't dry out
J-B Weld is proudly made in the USA
J-B Weld Plastic Bonder Syringe
Plastic Bonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a tan color and cures to a hard, permanent bond.
Use on:
Instructions
1. Prepare: Clean surface area of dirt, grease, oil, paint, or loose debris. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.
2. Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.
3. Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.
4. Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40 degrees Fahrenheit, then set time is longer.
J-B Weld is proudly made in the USA
J-B Weld 50139 Plastic Bonder Body Panel Adhesive and Gap Filler Syringe - Dries Black - 25 ml
J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz.