Custom LED

ELFR-1_QD

Custom LED Electronic LED Flasher Relay for LED Blinkers on Motorcycles - ELFR-1 QD

Turn Signal Assemblies & Lenses

Maintains OEM Blinker flash rate for a wide range of LED and non-LED blinkers. This is the same as our ELFR-1 but with simple Quick-Disconnect connectivity. Recommended accessory for all Custom LED Integrated LED Tail Lights. 1-year Warranty & Satisfaction Guarantee!
Your motorcycle must have a rectified standard 12VDC common negative ground system for this flasher relay to work (most bikes are 12VDC, common negative ground).
Red wire is Ignition power in, black wire is Load out.
See our regular ELFR-1 listing for all details. Also, check our company website (Custom LED) for a full compatibility list.

Now you can finally fix the flash rate on your motorcycle with our unique Plug And Play solution!This unit is guaranteed to replace any two-wire flasher relay and operate at the normal DOT blink rate for motorcycles with stock blinkers, LED blinkers, or any combination of both, provided the total load on the system is within 0.05A to 10A (0.6 Watts to 120 Watts!) - which basically covers the majority of blinker products on the market!NOTE: In some rare instances, when there are NO incandescent loads on the blinker system (LEDs front and rear), one pair of our Stage I Load Equalizers will also be required to prevent a wide range of blinker problems. These problems are all associated with a lack of resistive load on an all-LED blinker system that was designed for incandescent lamps. Problems such as, but not limited to: the 4-way blink problem (both sides blinking at the same time), the no-blink problem, and Integrated LED Tail Lights staying in "blinker mode" due to non-zero blinker voltages. Read more in our FAQ.Your motorcycle must have a rectified standard 12VDC system for this flasher relay to work (most bikes are 12VDC).

Custom LED Blaster-X Control Switch for Blaster-X Integrated Tail Lights
2008-2014 Yamaha Raider Blaster-X Integrated LED Tail Light
2002-2009 Yamaha Warrior Blaster-X Integrated LED Tail Light
2014-2018 Honda Grom Blaster-X Integrated LED Tail Light
TST Industries LED Front Flushmount Turn Signals and 3-2 Harness Converter for Honda Grom 2014 2015 2016 2017 - Smoke Lens
Holley 90617 Gauge Accessories and Sending Units - DRIVE BELT
2008 2010 Ford Super Radiator Shroud
Mix me 4502