Having to take out swirl marks, water spots and oxidation from a car by hand can be a time-consuming effort. But used with a Rotary Buffer and Meguiar’s Mirror Glaze 105, the Soft Buff Foam Cutting Pad can easily achieve a show car shine. Meguiar's Cutting Pad provides foam cutting action without leaving the marks created by wool pads, as it removes moderate surface imperfections.

Use with a rotary buffer (sold separately) for showroom quality results

Removing Oxidation and Scratches

Before working on a car with Meguiar’s, Mirror Glaze 105, Ultra Cut Compound and the Soft Buff Foam Cutting pad, begin by washing and drying the car thoroughly. If surfaces are rough to the touch, clay the car using Meguiar’s Smooth Surface Clay Kit first.

Applying Ultra Cut Compound

• 1. Attach the pad to the Dual Action Polisher.
• 2. Apply a strip of Meguiar’s, Mirror Glaze 105, Ultra Cut Compound directly onto the compound pad.
• 3. Place the face of the pad flat on the paint. Turn on the drill and begin buffing with moderate pressure in an overlapping pattern while keeping the pad flat against the paint at all times.
• 4. Work a small section at a time, until the Meguiar’s, Mirror Glaze 105, Ultra Cut Compound starts to turn clear. Apply additional Meguiar’s, Mirror Glaze 105, Ultra Cut Compound as needed until defects have been removed.
• 5. Before moving on to the next section, use Meguiar’s Supreme Shine Microfiber Towel to wipe away any product residue before it dries.
• 6. Repeat steps 4 and 5 as needed to complete the rest of the vehicle.