Okeler

PEKA

9336A 917-327 Automatic Transmission Fluid Dipstick for Chrysler Jeep Dodge vehicles

EAN: 0887378995929

UPC: 887378995929

Hard Parts

This tool makes the impossible possible because now you can check the transmission fluid level in a "sealed" transmission.
Clear marks on the rod promise easy-to-read oil levels
Brightly-colored handle makes the dipstick easy to locate under the hood
Note: The dipstick TOOL is for checking the fluid level ONLY! NOT designed to stay in the dipstick tube.
Comes with a chart that shows you what the transmission fluid level should be at for the matching temperature of the fluid

This is the Dealer tool for Chrysler-Jeep-Dodge vehicles that originally came without a dipstick.
This does not stay in the car. Just used for checking level and then removed.

Specifics:OE Spec or Performance/Custom: OE Spec
Superseded Part Number: Dodge Chrysler Jeep Ram VW Volkswagen, 3.5 2.4 3.3 62TE / CVT 2.0 4.0 4.7 3.0 6.4 3.6 3.7 1.8 2.7 3.8 5.7 2.0 3.3 6.1 L LITER
Manufacturer Part Number: 917-327 9336 9336A 917327 c 300c
Interchange Part Number: NAG1 42RLE CVT Dip Stick 300c c 2.0 3.6 5.7 6.1
Other Part Number: LX R/T SXT ST SE C/V SRT8 X ATX LIMITED
Surface Finish: NEW

How to use:
1. Verify that the vehicle is parked on a level surface.
2. Remove dipstick tube cap.
3. Engage parking brake. Start engine and let it idle with gear selector in the park position.
4. Shift the transmission lever through the gears several times with the vehicle stationary and engine idling.
5. Bring the vehicle up to operating temperature and check fluid level with engine idling. Push dipstick into transmission fill tube until it bottoms out against the transmission pan and pull out, read fluid level.
Note: The dipstick will protrude from fill tube when installed.
6. Check transmission fluid temperature using a scan tool.
Note: Accurate transmission fluid temperature can only be obtained by using a scan tool with the transmission leber in reverse or any forward gear position.
7. The transmission dipstick has level indicator lines every 10mm, check fluid level on dipstick. Determine proper fluid level using the correct fluid level chart for your vehicle.
8. Adjust fluid level as necessary and recheck level.
9. Install dipstick tube cap after checking fluid level.

*NOTE: Take the dipstick and gently insert it into your pan to feel the stop, if you go hard you can miss the stop and bend the dipstick.
*NOTE: DO NOT leave tool inside the dip stick tube when finished with level check.

GMC Acadia Outlook Xe GMC Acadia SLT Sl SLE Denali 2007-2012 - 2 Pcs(a Set) Rear Hatch Liftgate Gas Lift Support Struts Spring Shocks Arms
Acura 76841 SL4 003 Windshield Washer Reservoir 76841-SL4-003
Mix me 975