Mophorn

Mophorn Universal Intercooler

Mophorn Universal Intercooler 3 Inch Inlet Outet FMIC Front Mount Intercooler 24 x 12 x 3 Inch Core Size Turbo Intercooler with 2.5 Inch Intercooler Piping Kit (with 2.5 Inch Intercooler Piping Kit)

EAN: 0601285866710

UPC: 601285866710

Intercoolers

Inlet and Outlet: 3"; Core Size: 24" x 12" x 3" ; Overall size: 31" x 12" x 3"
2.5" Piping Diameter /Pipe Thickness:1.8mm,Includes 8 piece 2.5" alloy hard pipe kit with 8 silicone joiners as shown
Model: Universal; Placement on Vehicle: Front; Material: TIG welded T6061 aluminium; Design: Tube and fin; High efficiency bar and plate intercooler design
The finish of this front mount turbo intercooler is polished,it's Perfect for your next turbo project or upgrade
This universal front mount intercooler will give the perfect cooling capacity needed for smaller turbo applications. All mishimoto intercoolers are constructed of 6061 aluminum and are tig-welded to perfection

Universal Alloy Turbo Rally Race Car Front Mount Intercooler Core Hard Pipe Kit

Introduction:

Front mount intercooler is an excellent way of safely increasing BHP. It helps reducing the engine's inlet temperature and creating a denser air charge. This will make more power at the same boost level. This universal intercooler is designed to give maximum cooling capacity while allowing for minimal pressure drops.

Features:

- Model: Universal; Placement on Vehicle: Front; Material: TIG welded T6061 aluminium; Design: Tube and fin; High efficiency bar and plate intercooler design.

- This Turbo Intercooler is made of aluminum, hand welded, constructed with a tube and fin design

- This Universal Intercooler is good for up to 350 bhp; It has low pressure drop 0.2psi at 15psi

- Universal fittment. Modifications may be required to fit various makes and models

- This Turbo Intercooler can safely increase bhp on your turbocharged engine

Tech Data:

- Model: Universal

- Placement on Vehicle: Front

- Aluminum, hand welded, constructed with a tube and fin design

- High efficiency bar and plate intercooler design

- Inlet and outlet: 3"

- Core Size: 24" x 12" x 3" (600mm x 300mm x 76mm)

- Holds up to 350bhp.

- TIG welded T6061 aluminium.

- Max PSI - 30.

- Pressure drop is under 10%.

- Pipe Thickness:1.8mm

- All our intercooler has been tested to withstand more then 80psi pressure and it has very small pressure drop across the end tanks.

Package Included

1 x Intercooler

2.5Inch 8-Piece Piping Set Includes:

8x Various Curved Pipes

16 x T-Bolt Clamps

8 x Straight Hoses

Fits:

- Universal fittment - please note that modifications may be required to fit various makes and models

ABS MODULE COMPUTER Cutlass Regal Lumina 1995 95
APA/URO PARTS
Mix me 155