Gear Boxes Southwest Speed 105-3011_107-1448

Southwest Speed

105-3011_107-1448

NEW VEGA MANUAL STEERING BOX WITH FLAT PITMAN ARM, GM 140 CROSS STEERING GEAR BOX, STREET ROD, HOT ROD, RAT ROD, 1923 - 1948 FORD, T-BUCKETS, MODEL A, DESIGNED TO MOUNT ON OUTSIDE OF FRAME RAIL

Gear Boxes


Brand New Vega 140 GM Manual Steering Box and Pitman Arm designed to mount to the outside of the frame rail for the applications described below (Part #105-3011 and # 107-1448) > These are brand new parts produced by Southwest Speed
Features: > Vega GM Manual Steering Box: > Steering Shaft Spline: 5/8"-36 > Ratio: 20 : 1 > 5 1/2" Turns (Lock-to-Lock) > Mounting pattern is 2 3/4" and 4 3/8" center-to-center of the three mounting holes > Centerline of the output shaft to the front of the box is approximately 3" Overall length of the box, not including the input shaft, is 5 3/4"
Input shaft extends rearward 1 3/16" > From adjust screw to end of output shaft is 8" > From outside of box to area on mounting surface is 4 1/2" > Box has a swell in the casting that extends past the mounting legs an additional 1/4" > This is the stock configuration, meaning when you turn the input shaft clockwise, the output shaft also turns clockwise > Recommended for vehicles weighing 2800 lbs or less
Pitman Arm: > Non-offset design | Measures: > 6" Center-to-Center > 7 1/2" Total length > 1/2" Straight-through tie rod hole
Fits: > These boxes are perfect for the cross steering system in hot rod applications with straight axle setups: > Including Street Rods, Rat Rods, Hot Rods, T-Buckets, Model A's, 1923-1948 Fords, and many other vehicles: > You can see a better description of "Cross-Steering" in the diagram

Brand New Vega 140 GM Manual Steering Box and Pitman Arm designed to mount to the outside of the frame rail for the applications described below (Part #105-3011 and # 107-1448).

These are brand new parts produced by Southwest Speed.

Features:

Pitman Arm:

Measures:

Fits: