Southwest Speed

650-39705

NEW CHEVY 365 BELLHOUSING, INSPECTION & DUST COVERS, CLUTCH FORK & BOOT, BALL & THROWOUT BEARING FOR 55-57 CHEVY, 55-59 CORVETTE WITH SBC OR BBC WITH MANUAL TRANSMISSION, STAMPED #GM 3733365

Bell Housings

Brand New GM 365 Bellhousing Kit, produced by Southwest Speed (SWS Part # 650-39705). > This kit includes Throwout Bearing, Clutch Fork and Boot, Flywheel Inspection Shield, Lower Dust Cover, Clutch Ball, and the Reproduction of the highly sought after 3733365 Chevy Bellhousing for 55-57 Chevy's with V-8 engines > This is an exact reproduction with a date code of November 19, 1955 cast in the part, along with the 3733365 part number
Every detail of this bellhousing has been retained in the exact form > These vehicles came equipped with a 168 tooth flywheel and a 10 1/4" clutch disc > This bellhousing will also accommodate the factory 168 tooth flywheel, as well as the modern 168 tooth flywheels, which will allow either a 10 1/2" or a 11" clutch disc to be used
Just like the original part, except brand new, this bellhousing will accept all of the original or stock components with no other modifications > If you are doing a restoration of a classic Chevy muscle car or just want the original 3733365 bell housing to finish that rod project, this bellhousing is the perfect part!
Factory Applications: | Chevy: > 1955-1957 150 with V-8 Engines > 1955-1957 210 with V-8 Engines > 1955-1957 Bel Air with V-8 Engines > 1955-1959 Corvette with V-8 Engines > 1957 Del Ray with V-8 Engines > 1955-1957 Nomad with V-8 Engines > 1955-1957 Sedan Delivery with V-8 Engines > *With Manual Transmissions and 168 tooth Flywheel
Note: This bellhousing will fit all of the models listed above regardless of the bell housing build date. This bell housing however Will Not Fit Trucks or Inline 6 Cylinder Engines > The bellhousing was used with 4 speed transmissions in all 1955-1957 Chevy 150's, 210's, Nomad's, Sedan Delivery's, & 1957 Del Ray's, as well as 1955-1959 Corvette's with Small Block Chevy Engines except Trucks, & Models with Inline 6 Cylinder Engines

Kit Includes:

• Southwest Speed Cast Performance Bellhousing (SWS # 650-3970)
  • Factory Reproduction 3733365 Bellhousing
  • Part number and build date cast exactly as the original bellhousing
  • Part Number: 3733365
  • Build Date: November 19th, 1955
  • Accepts all standard GM Manual transmissions with 4.675" O.D. bearing retainer
  • Fits all SBC and BBC engines, regardless of factory clutch size
  • 3/8"-16 holes for frame mounting
  • 1/2"-13 holes for transmission
  • 3/8"-16 holes for clutch z-bar bracket
  • 3/8"-16 holes for starter with top hole 3/8 clearance hole for thru-bolt
  • 1/4"-20 holes for dust shields

• Southwest Speed Upper Flywheel Inspection Shield (SWS # 650-3963)
  • Replaces GM Part # 3734908
  • Includes 1/4"-28 threaded bolts
  • Exact Replica of the Original
  • Fabricated from steel

• Southwest Speed Lower Bellhousing Dust Cover (SWS # 650-3964)
  • Replaces GM Part # 3704923
  • Includes 1/4"-28 threaded bolts
  • Exact Replica of the Original
  • Fabricated from steel

• Southwest Speed Clutch Fork with Ball Retaining Spring (SWS # 650-4026)
  • Replaces GM # 3739043
  • Exact Replica of the Original

• Southwest Speed Throwout Bearing (SWS # 650-4035)
  • Replaces GM # 19245400
  • Exact Replica of the original

• Southwest Speed Clutch Fork Boot (SWS # 650-3949)
  • Replaces GM Part # 3738285
  • Exact Replica of the original
  • Crafted from Leather
  • Prevents dirt and moisture from entering the bell housing
  • Designed to be a snug fit that will last for years
  • Boot has sewn seams and metal brackets like the original

• Southwest Speed Standard Clutch Fork Pivot Ball (SWS # 650-4018)
  • Replaces GM Part # 3729000
  • Installs into bellhousing to support clutch fork
  • 13/16"-16 Threads, 1 1/2" total length end to end

  
  
  Bully Dog Rapid Power ATF Transmission Fluid Lexus RX330 Diesel - Transmission - Transmission Fluid
  Canister Cadillac Chevrolet Pontiac 12611801 USB-VSV045
  Mix me 4212