Amazingli
AL-170-185
Amazingli 175 to 185 Degree Cooling Fan Thermostat Kit Temp Sensor Temperature Switch 40 AMP Relay Kit
EAN: 0712324965940
UPC: 712324965940
Kits
Sending Unit Thread Size: 3/8-18 NPT, Voltage: 12 V
175 - 185 degree electric fan thermostat relay switch kit for your cooling system
Includes a brass adapter to install the sending unit, wires, relay switch, circut breaker
Helps to set up to turn your electric fan on at 185 degrees and shut off at 175 degrees, can work with any 12 volt system
Fit for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 engines
Product Details:
-- 100% brand new with high quality, durable to use.
-- Material: Plastic and Metal
-- Cable Length: approx. 165cm
-- Voltage: 12V DC
Fitment:
Fit for 265 283 305 307 327 350 383 400 396 402 427 454 472 502 260 289 302 351W 347 352 360 390 Engines
Fit for 406 427 428 429 460 351C 351M 400M 273 318 340 360 361 383 400 413 426W 440 455 330 326 Engines
Installation Guideline:
1. Mount the relay under the hood in a convenient location as to the fan as possible.
Notice: Don't use the teflon tape or thread compoud on the thermostat or adaptor. For proper operation, the thermostat must ground threough the threads to the engine and the engine must be ground.
2. Install thermostat into the head or intake manifold. Route the black wire to thermostat and cut to length. Crimp the red terminal onto the black wire and attach to thermostat.
3. Route and connect the red wire to the fan + terminal or power wire coming from the fan motor printed to electric fan.
4. Mount the circuit breaker provided in a convenient location as close as possible to whichever power source(battery or large terminal on the starter solenoid)you are using for the fan relay.
5. Cut to length and install using a small yellow ring terminal. With another small yellow ring terminal take the remaining red wire and connect the unused post on the circuit breaker to the battery source. This wire is printed to battery / constant hot.
6. Route the brown wire to the ignition switch or the fan switch whichever is more convenient.
PLEASE NOTICE:
-- Please check the compatiblity to make sure correct fitment before purchase.
-- Please allow 0.1-0.5cm difference due to manual measurement.
Package Includes:
1 Set Cooling Fan Thermostat kit
Upgr8 Universal High Performance 12V Slim Electric Cooling Radiator Fan With Fan Mounting Kit (16 Inch, Black)
16 Heavy Duty Radiator Electric Fan 3000 CFM Brand New Reversible SBC BBC 350
Derale 13001 Plastic Rod Mounting Kit
Fan Thermostat Temperature Switch Engine Cooling Sensor Relay Kit 185 to 200 Degree
Stant 45358 SuperStat Thermostat - 180 Degrees Fahrenheit
Sealed Power 245-16691 Valve Seat
2005 2009 Mustang Trunk Release Button 3475
Mix me 2649