Southwest Speed
FDM8793X-K14
NEW SUSPENSION & WILWOOD BRAKE SET WITH CURRIE REAR END & AXLES, POSI-TRAC 3RD MEMBER, PARKING BRAKE CABLE, 11 DRILLED DISCS, RED CALIPERS, 87-93 FORD MUSTANG V-8, 87-88 THUNDERBIRD, 84-86 SVO 5-LUG
Combination Axle Kits
Brand New Suspension and Brake Kit for 1984-1993 Ford (Part # FDM8793X-K14) > This specific set features Wilwood brakes with Drilled/Slotted Rotors and Red Calipers | Fits: > 1984-1986 Ford Mustang SVO* > 1987-1993 Ford Mustang with V-8 Spindles* > 1987-1988 Ford Thunderbird Turbo Coupe* > *** These are for 5 lug applications only ***
Includes: > Currie F9 Fabricated Rear End with 31 Spline Axles (Currie # CE-FDM7993X5) > F9 Fabricated heavy-duty housing > 31 Spline performance axle package > Built to the stock overall width (59 1/2") and pinion offset specs > 59 1/2" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on
Stock suspension brackets are installed in the stock location for an easy bolt-in installation, and urethane upper control arm bushings are installed in the upper control arm housing brackets Housing includes all 3rd member studs installed | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078)
Wilwood Disc Brake Kit with Drilled/Slotted Rotors and Red Calipers (Wilwood Part # 140-11018-DR Front and # 140-11389-DR Rear) | Front Brake Kit includes: > Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors > Forged Dynalite 4 Piston Calipers - Red > Caliper Mounting Brackets > BP-10 Smart Compound Brake Pads > Hubs, Bearings, Seals > All Bolts, Washers, and Shims necessary to install the complete braking system on both front wheels
Rear Brake Kit includes: > Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats > Low-Profile Dynapro 4 Piston Calipers - Red > Drum Parking Brake Assemblies with Caliper Mounting Brackets > Bearing Retainers > BP-10 Smart Compound Brake Pads > All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels | Front and Rear Flexline Kits | Rear Hard Line Kit Rear Parking Brake Cable Kit
Brand New Suspension and Brake Kit for 1984-1993 Ford (Part # FDM8793X-K14).
- This specific set features Wilwood brakes with Drilled/Slotted Rotors and Red Calipers.
- Currie F9 Fabricated Rear End with 31 Spline Axles (Currie # CE-FDM7993X5)
- F9 Fabricated heavy-duty housing
- 31 Spline performance axle package
- Built to the stock overall width (59 1/2") and pinion offset specs
- 59 1/2" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on
- Stock suspension brackets are installed in the stock location for an easy bolt-in installation, and urethane upper control arm bushings are installed in the upper control arm housing brackets
- Housing includes all 3rd member studs installed
- Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors
- Forged Dynalite 4 Piston Calipers - Red
- Caliper Mounting Brackets
- BP-10 Smart Compound Brake Pads
- Hubs, Bearings, Seals
- All Bolts, Washers, and Shims necessary to install the complete braking system on both front wheels
- Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats
- Low-Profile Dynapro 4 Piston Calipers - Red
- Drum Parking Brake Assemblies with Caliper Mounting Brackets
- Bearing Retainers
- BP-10 Smart Compound Brake Pads
- All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels
Wilwood Disc Brake Kit with Drilled/Slotted Rotors and Black Calipers (Wilwood Part # 140-11018-DR Front and # 140-11389-DR Rear)
- Front Brake Kit includes:
Rear Hard Line Kit
Rear Parking Brake Cable Kit
Centric Cryostop Rotor 120.40043CRY
00 07 Focus Wheel Traction Control LIN0502OM
Mix me 3146