Wilwood Engineering

260-13784

Wilwood Engineering 260-13784 Residual with Fittings (10Lb)

EAN: 0889545074796

UPC: 889545074796

Drum Hardware Kits

10 pound
w/ fittings
Pressure Valve

Wilwood two pound and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums. Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Valves with fittings are supplied with two 1/8-27 NPT to 3/-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.

Wilwood Engineering 260-13783 Residual with Fittings (2Lb)
25 Ft. of 3/16 (4.75 mm) Copper Nickel Brake Line with Fittings
Wilwood 260-11179 Proportioning Valve
25 Ft. Roll / Coil of 3/16 Copper Nickel Brake Line Tubing
Wilwood 260-8419 Adjustable Proportioning Valve Knob
FORD THUNDERBIRD 89-93 RADIATOR
Bosch MAP Sensor 038906051B 0281002399
Mix me 1868