Hanperal

HR-140291

Hanperal Universal Magnetic Gauge Tool for Car/Truck Camber/Castor Strut Wheel Alignment

EAN: 0735810441599

UPC: 735810441599

Tire Repair Tools

Easy to read and convenient to operate
There are super suction, two positioning blisters
Suitable for accurate checking of the castor and camber angle
Has a simple leveling adjustment from -5 degrees to 5 degrees
It's allows you to return the strut to the original camber position after dismantling and re-assembling

Feature:
1.Time and money saving device.
2.Weight: 256g/9.14oz
3.Measures the Camber and Caster angle on the wheel hub or brake disc.
4.Has a simple leveling adjustment from -5 degrees to 5 degrees.
5.It's allows to adjustment to maintain correct wheel alignment and even tyre wear.
6.This adjustable equipment allows you to return the strut to the original camber position after dismantlingThis adjustable equipment allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
Instructions for use:
1. Remove the wheel alignment sensor (Clip tool), remove the tire;
2, The magnetic level gauge carefully on the side of the suction wheel disc brakes;
3, the water level was adjusted to zero;
4, install the required location specific parts;
5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle.
6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)

Longacre 79501 Toe-In Plate
Specialty Products Company 81260 Alignment Kit
Specialty Products Company 81250 Alignment Kit
Tenhulzen Auto 2200 Toe Plates with degrees conversion included
Specialty Products Company 81270 EZ Cam XR 15mm Adjuster Bolt - Pair
HJC CS-R2 Matte Black Full Face Motorcycle Helmet - Small
00 09 Honda S2000 Adjustable Camber MR6825
Mix me 727