Dr.Roc

DR-25097

Dr.Roc 1/2 Scissor Jack Adapter For Use With Drill/Wrench/Tire Iron To Accelerate

Vehicle Lifts, Hoists & Jacks

Lift Your Jack Very Easy:Made Of Very Solid Chrome Vanadium Steel,Easily use with your scissor jack,
Suitable to most of loop type or double eyelet type scissor jacks in the market if you are worry about it's compatibility please check the oval's size on your jacks
Slot Size: 8.8mm(0.35 inch) wide,23.90mm(0.94 inch) deep;Bolt Length:4.1cm ;Bolt Dimensions:9.7mm
Easy to use with the following tools:1) 1/2" drive/impact drills/ratchet or standard drive sockets;2) 13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill;3) If you don't have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks
Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service with lifetime warranty

Dr.Roc Helps You To Proceed Without Hindrance

Most trusted auto accessories expert,millions buyers' choice

It's difficult to lift your car with the scissor jack?
This adapter make it very easy to use your scissor jack,when it is used with wrenches,especially with power drill or impact wrench

Specifications:
Material:Chrome Vanadium Steel(50BV30 Steel)
Exterior:Black oxide finish
Item Weight: 135 g(4.86 ounces)
Product Dimensions:50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches)
Slot Size: 8.8 mm(0.35 inch) wide,23.90 mm (0.94 inch) deep
Bolt Length: 4.1 cm (1.6 inches)
Bolt Dimensions:0.97 mm
( enough to fit most of scissor jacks ,to ensure this ,you can check the oval's size on your jacks)

Easy to use with the following tools:
A.1/2" drive/impact drills/ratchet or standard drive sockets
B.13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill

Note:
1.If you don't have a 1/2 inch hex or impact wrench,you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks
2.This adapter fits most of the scissor jacks in the market, including loop type(hole diameter>9.7 mm) or double eyelet type(hole diameter>9.7 mm, eyelet distance<16.5 mm)
3.There are rare cases some 1/2" drives can't fit this adapter,it is most likely the drive is not strict 1/2",Pls change another drive or contact us to return it

Torin Big Red T10152 Steel Scissor Jack, 1.5 Ton (3000 lb) Capacity
Pro-Lift T-9456 Grey Scissor Jack - 3000 lb. Capacity