BAILONGJU

Bailongju28

Bailongju Toyota Easy Installation Car Door LED Logo Projector Ghost Shadow Lights 2-pc Set

EAN: 0710749703604

UPC: 710749703604

Lighting & Electrical

Dedicated to the toyota car,Installation is simple,Directly replace the original car door lights
No drilling, no wiring, no disassemblying, no damage to your Car. Easy to install,It will only take you about 5 minutes.
When the door is opened, the TOYOTA LOGO is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle.
High Definition and Bright Projection.Using high brightness LED chip,Very bright lighting output,Very low power consumption.
Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.

This welcome lights is positioned into the under surface of the front doors. When the door is opened, the toyota logo is illuminated onto the open door surface to provide a light to aid entry into and out of the vehicle. When you close the door, the logo light disappears.

Compatibility:

Toyota
4 Runner 2010 to 2018
Avalon 2005 to 2018
Camry 2007 to 2018
Highlander 2001 to 2018
Land Cruiser 2008 to 2018
Prius 2010 to 2018
Sequoia 2013 to 2018
Sienna 2011 to 2018
Tundra 2007 to 2010
Venza 2009 to 2018
Package Include:
2 pieces welcome light
Package Size: 9.5 * 3.8 * 9.5 (cm)

Installation Instructions:
1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Original Door Step Lights;
2. Plug In new Door Lights With Correspondent Connector;
3. Put new Door Lights To The Spot Where Your Original Step Lights Were.
4. Done! Logo Should Be Projecting On To The Ground.