Ulincos

U19D1SW

Ulincos Momentary Pushbutton Switch U19D1 1NO SPST Silver Stainless Steel Shell with White LED Ring Suitable for 19mm 3/4 Mounting Hole Pack with a Resistor

Pushbutton Switches

Momentary switch: Push & Hold,ON; Release,OFF
There is no pigtails for U19D1 switch.It need to be soldered carefully
The switch and LED are separated, LED can be on all the time or only on when switch is on,depending on how you wire it
The rated voltage of the LED is 1.8 - 2.8V, with soldering the resistor in the package, you can fit it for 12V system
Great for electromagnetic starter, relay, Horn Button Switch, PC Power Switch or any circuit controls

What You Get
1 * pushbutton switch
1 * resistor (680Ω)
1 * wiring instruction

What's the Pushbutton Switch
This is a perfect choice if you are in need of a rugged push button! These push buttons are a very tough, small, panel-mount momentary switch with an illuminated white LED ring. It is a SPST with 19mm threading. These momentary buttons are rated up to 3A and 250VAC while the LED is rated for 1.8-2.8V

What's the Momentary Switch
Momentary switch, normally open, remain in ON state as long as being pressed

What's the Momentary Switch Used for
Most often momentary switches are used for circuits control in electromagnetic starter, stuff like relay, Horn Button Switch, PC Power Switch or any circuit controls

What's Note
-These switches come with a rubber O-ring which makes them splash resistant but they can NOT be submerged in the water
-The switch is rated up to 3A/250VAC, but the LED is rated for 1.8-2.8V, if you want the switch and LED to work under 12V, you need to add the resistor

What's the Customer Support
If you have any questions, feel free to contact us by E-mail any time.We get professional customer service staff and technician to help you

Specifications
Head diameter: 7/8" (22mm)
Button diameter: 0.4" (11mm)
Mounting hole size: 3/4" (19mm)
Depth inc contacts: 0.8" (20mm)
Switch combination: 1NO
Operation types: Momentary
Switch rating: 3A/250VAC
LED voltage: 2.8V DC
Resistor: 680Ω
Head shape: Flat
Enclosure material: Stainless Steel
Protection level: IP65,IK08

Ulincos Latching Push Button Switch U19C2 1NO1NC SPDT ON/OFF Silver Stainless Steel Shell with White LED Ring Suitable for 19mm 3/4 Mounting Hole (White)
Ulincos Latching Pushbutton Switch U19C1 1NO1NC SPDT ON/OFF Silver Stainless Steel with Blue LED Suitable for 19mm 3/4 Mounting Hole (Blue)
NOT FIT U19D1, 19mm Pigtail, Wire Connector, Socket Plug for U19C3 Push Button Switch (Pack of 2)
Ulincos Latching Push Button Switch U16F2 1NO1NC SPDT ON/OFF Silver Stainless Steel Shell with White LED Ring Suitable for 16mm 5/8 Mounting Hole (White)