EPAuto

AA-003-1

EPAuto 4 Gauge x 20 Ft 500A Heavy Duty Booster Jumper Cables with Travel Bag and Safety Gloves (4 AWG x 20 Feet)

EAN: 0690443852467

UPC: 690443852467

Battery Jumper Cables

No-tangle cable. Copper-plated Clamps
Heavy Duty 4 Gauge cable
Booster Cable comes with a travel bag and a pair of safety working gloves
Perfect for cars, motorcycles, trucks, vans and SUVs.

Package:

• 4 Gauge 20 Feet Booster Cable
• Carry Bag
• Safety Working Gloves

Jump Start your Vehicle:

1. Make sure both vehicles are turned off.
2. Connect one end of the red clamps to the postive (+) post of the dead battery
3. Connect another end of red clamps to the positive (+) post of the good battery
4. Connect one end of the black clamps to the negative (-) post if the good battery
5. Connect another end of the black clamps to the frame bumper or engine block of the dead battery. DO NOT CONNECT DIRECTLY TO THE NEGATIVE (-) POST.
6. Make sure clamps from one cable do not accidentally touch the clamps of the other cable.
7. Start the working vehicle
8. Wait 1-2 minutes, start the dead vehicle, and then keep the vehicle running for a few minutes for recharging the battery.
9. Disconnect the cable clamps in the reverse order.

EPAuto 12V DC Portable Air Compressor Pump, Digital Tire Inflator by 100 PSI
HFS (R) 2 X 30' , 4.5 Ton 2 Inch X 30 Ft. Polyester Tow Strap Rope 2 Hooks 10,000lb Towing Recovery
Powerbuilt 940558 14 Universal Lug Wrench