FOXWELL

FBA_nt200

FOXWELL BT705 12V&24V Battery Analyzer 100-2000 CCA Automotive Car Battery Load Tester, Cranking and Charging System Test Scan Tool Digital Battery Tester for Cars and Heavy Duty Trucks

EAN: 0712321437501

UPC: 712321437501

Battery Testers

Car Battery Tester: Expanded measurement range from 100-2000 CCA for 12V&24V auto batteries. Checks batteries (via CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB), alternator output. Analyzes the battery healthy status to calculate the actual cold cranking capability of the battery and the aging status.
Can determine bad cells on cars, boats and most 12V-24 Vregular flooded, AGM flat plate ,AGM spiral, gel and deep cycle batteries(with a starting rating).
Supports car cranking test and alternator charging system tester, to provide you with accurate test results and to tell you the problems and hidden dangers.
Car Cranking Test Tool: Displays the decision on the starter system, cranking voltage, and cranking time in milliseconds. For an in-vehicle test, the display alternates between the test results and the message. Press ENTER for charging test.
Car Charging System Test: Checks 12V or 24V charging system to make sure the output voltage of the generator is normal, the rectifier diode works correctly and the charging current is normal.

BT-705 battery tester is dedicatedly developed to test 12V regular flooded, AGM flat plate, AGM spiral and gel batteries and 12V & 24V starting and charging system. It provides a quick, easy and affordable solution for technicians to check battery health and detect faults of starting and charging system.

Features and Benefits:
Multiple vehicle applications ¨C passenger cars and duty trucks
Tests batteries from rated from 100 to 2000CCA
Tests multiple battery types- regular flooded, AGM flat plate ,AGM spiral and gel
Tests multiple rating systems-CCA,BCI,CA,MCA,JIS,DIN,IEC,EN,SAE,GB
Tests the batteries on the car directly- no need to remove the battery
Detects bad cells
Quick and accurate test result display in just 3 seconds
Tests 12&24 volt charging system
Quick starter analysis without disabling the ignition
Does not emit light, heat or spark ,or discharge battery-keeps operation safe for all levels of users
Automatic temperature compensation
Ripple voltage test for easy and intuitive check of faults
Extremely easy to use with large backlight LCD display and menu-driven operation
Multi-language systems are available on language menu-English, French, German, Russian, Spanish, Dutch and Italian
Optional Bluetooth printer

Important:
1. The BT705 can't test 6V battery! 2. Do not connect the tester to a voltage source greater than 30VDC; otherwise you may damage the tester.
3. If you are testing inside a vehicle, make sure all accessory loads are cut off, the key is not in the ON position and the doors are closed.
4. Before starting the cranking test, inspect the alternator drive belt. A belt that is glazed or worn, or lacks the proper tension, will prevent the engine from achieving the rpm levels needed for the test.

Lisle 64970 Parasitic Drain Tester  
SG Tool Aid 23500 Back Probe Kit
BETOOLL 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools
Schumacher BAF-B1 Terminal Cleaning Brush
INNOVA 3340 Automotive Digital Multimeter (10 MegOhm/UL)
Westar Industries EM-9350 Transmission Mount
ROCK PRODUCTS
Mix me 540