Pegasus Auto Racing Supplies

SHK-FORD-001-BLACK

Pegasus SHK-FORD-001-BLACK, Silicone Hose Kit, Ford F150 5.0 / EcoBoost Reservoir, Black

EAN: 0889311731311

UPC: 889311731311

Coolant Recovery Kits

Contains all of the parts you need to replace the stock coolant reservoir hose with a reliable clamped connection.
Eligible for FREE SHIPPING on Amazon orders of $49 or more (on products sold and shipped by Pegasus Auto Racing Supplies)

Replace the leaky, unreliable quick-disconnect elbow on the coolant reservoir of your 2011-14 Ford F150! This hose is part of the pressurized cooling system, and the clip-retained hose often leaks where it meets the reservoir. This handy kit contains all of the parts you need to replace the stock hose with a more reliable clamped connection. Kit contents: 1x RE9025.19-Black Silicone Elbow, 1" to 3/4" 90 Degree Reducer 1x HJ19 Aluminum Hose Joiner, 3/4" 2x 3613-1.25 Lined Hose Clamps for 3/4" End 2x 3613-1.75 Lined Hose Clamps for 1" End To install: Remove the stock clip-retained hose from the reservoir and from the lower hose. Install the aluminum joiner in the lower hose and secure with one small hose clamp. Slide the small end of the reducing elbow onto the aluminum joiner, securing with one small hose clamp. Slide the large end of the reducing elbow over the nipple on the coolant reservoir. Be sure to slide the hose far enough that you can position one of the large hose clamps above the clip slot. This is critical to prevent the hose from coming off under pressure. Install one large hose clamp on the reducing elbow below the clip slot. This clamp will create the liquid-tight seal. Install the second large hose clamp on the reducing elbow above the clip slot. This clamp will keep the hose in place. Installation usually takes less than 2 hours.

Genuine Ford Fluid VC-3DIL-B Orange Pre-Diluted Antifreeze/Coolant - 1 Gallon
Motorcraft WR6135 Ignition Spark Plug Boot
Motorcraft FA1883 Air Filter
Motorcraft KM-5114 Upper Radiator Hose
Motorcraft FL500S Oil Filter
This is a Brand New Starter for Deutz Marine Engines BF4L1011 (2.71L-2732cc) 1989-1994, Deutz Marine Engines F2L1011 (1.4L-1366cc) 1989-1994, Deutz Marine Engines F3L1011 (2.0L-2049cc) 1989-1994, Deutz Marine Engines F4L1011 (2.7L-2732cc) 1989-1994, and K
Assembly Locking 2007 2017 Wrangler Unlimited A05-139-AAA-2
Mix me 2602