Motivx Tools

MX2301

Motivx Tools Engine Oil Funnel for Toyota, Lexus, and Scion Vehicles with Threaded Oil Filler Caps – Fits Most Camry, Corolla, RAV4, Tacoma, Highlander, Sienna, Tundra, RX350 and Many More

EAN: 0851808006059

UPC: 851808006059

Funnels

THIS OIL FUNNEL THREADS ONTO THE ENGINE IN PLACE OF THE OIL FILLER CAP - fits most Toyota, Lexus, and Scion vehicles with threaded oil filler caps (does not fit Prius or engines with half-turn tab style oil filler caps)
NO MORE HOLDING YOUR FUNNEL IN PLACE WHILE POURING OIL INTO THE ENGINE - this funnel stays where it's supposed to so you have both hands free to work with
SAY GOODBYE TO SPILLS AND THAT BURNING OIL SMELL - this funnel seals to the engine with a rubber gasket and securely threads into place so it won't fall over or leak
WITH IT'S HEAVY DUTY CONSTRUCTION THIS FUNNEL WILL LAST THE LIFE OF YOUR VEHICLE - the bottom chamber is constructed with very thick, heavy duty plastic and the upper portion is highly durable yet flexible
ENTER YOUR VEHICLE INFORMATION TO SEE IF IT FITS YOUR CAR OR TRUCK - Fits many of the following vehicles: Toyota: 4Runner, Avalon, Camry, Celica, Corolla, Echo, FJ Crusier, Highlander, Land Cruiser, Matrix, MR2, Pickup, RAV4, Sequoia, Sienna, Solara, Supra, T100, Tacoma, Tercel, Tundra, Venza, Yaris. Lexus: CT, ES, GS, GX, HS, IS, LS, LX, NX, RX, and SC. Scion: tC, xB, xD, iQ, iM, and xA

Questions & Answers
Why do I need this funnel?
We aren't saying traditional funnels don't work, but our funnels can make for easier and cleaner oil changes for not a lot of money.

The "no funnel" approach - We've all probably been guilty of this. This is thinking you can pour a full quart of engine oil into the engine through the small hole in the valve cover from some distance above it. This is easier on some engines than others, but usually results in at least some spilled oil.

The "regular funnel" approach - Unless you can find a funnel that will friction fit into the oil fill port, they are usually too long and end up touching a baffle or something else causing restricted oil flow. Since they don't seal, if you pour oil in faster than it can drain down into the engine oil might overflow. Many times these funnels require you to hold them the entire time, otherwise they tend to fall over.

The "Motivx Tools engine oil funnel" approach - Since this funnel screws into the oil fill port, it doesn't require any holding whatsoever so you are free to use both hands. It seals to the engine with a rubber gasket so even if you pour oil in faster than it can drain down into the engine it won't leak. You can also leave single quarts of oil in the funnel to completely drain while retrieving and opening the next one.

Will this funnel fit my vehicle?
If your vehicle that has a threaded oil filler cap and isn't a Prius, it will fit. It does not fit the Prius because of hood clearance issues, and does not fit any engine that uses the tab style oil filler cap. The tab style has two metal tabs on the bottom of the cap that index with the valve cover. You can enter your vehicle information into Amazon near the top of the page to see if we have tested this funnel against the oil filler cap used on your vehicle. It it says it won't fit, take a quick look at your oil filler cap to see if it's threaded or not just to double check.

Toyota, Lexus, Scion Oil Filter Drain Tool for 2.5L to 5.7L Engines - No More Messy Oil Changes on Toyota's Cartridge Style Oil Filter System
Motivx Tools Toyota & Lexus Oil Filter Wrench for 2.5L to 5.7L Engines - Perfect for Camry, RAV4, Highlander, Sienna, Tundra and More - Fits 64mm Cartridge Style Oil Filter Housings
Genuine Toyota - Oil Drain Plug Gaskets (QTY10) - 90430-12031
Genuine Toyota 15620-31060 Oil Filter Cap Assembly
Toyota Genuine Parts 04152-YZZA1 Oil Filter
88GB-12A650--HA MERKUR 1988 1989 SCORPIO computer module ECM ECU
Wagner BD60333 Premium Brake Drum
Mix me 3402