Michigan Motorsports

15600

Michigan Motorsports 7.3 L Powerstroke Valve Cover Gasket Injector Glow Plug Harness Pigtail - Fits 1997-2003 Ford 7.3L

EAN: 8428700698082

Glow Plug Kits

10" Wire ends on exterior pigtails
Fits Mid 1997 and up to 2003 7.3L Powerstroke engine

Michigan Motorsports pigtails fit 1997 to 2003 Ford 7.3L Powerstroke Glow Plug Injector Harness Pigtail. A very common problem on the 7.3L Powerstroke is that the main connector at the valve cover melts down This connector handles the current for both the glow plugs and injectors (both of which are under the valve covers.) The purpose of this kit is to repair the connector on the outside of the valve cover which is really a part of the engine wiring harness. This will save you time and money as opposed to buying a whole new engine wiring harness. Often times when this failure occurs, you will also need to replace the valve cover gasket, and the internal harnesses under the valve cover as well to prevent a repeat failure (sometimes the failure is due to oil seeping into the connector). . This kit will work on mid 1997 and up to 2003 7.3L Powerstroke engine ONLY. If you have a 1997 model you need to check the number of electrical connectors you have per valve cover. If you have a single connector per side, this is the correct kit.

Motorcraft FL1995 Oil Filter
Motorcraft FD4596 Fuel Filter
Bosch 69136 Original Equipment Replacement Electric Fuel Pump
Lisle 68210 IPR Socket for Ford Diesel
Motorcraft ZD11 Glow Plug
Wells E1124 Fresh Air Duct Hose
Volkswagen 3D0 HVAC Blower Motor 3D0 959 101
Mix me 3048