Hub Assemblies Southwest Speed 203-9043

Southwest Speed

203-9043

NEW SOUTHWEST SPEED RACING MICRO SPRINT FRONT AXLE, BRAKE, HUB, AND SPINDLE KIT WITH CHROMOLY AXLE, TIE ROD, LEFT & RIGHT SPINDLES, KING PINS, STEERING ARMS, KEIZER LIGHTWEIGHT 3 SPOKE POLISHED HUBS, BRAKE ROTOR, MCP BRAKE CALIPER WITH PADS, AND CALIPER MOUNTING BRACKET WITH HARDWARE, FITS 600 MICRO / MINI-SPRINT SPINDLES WITH 1 DIAMETER X 2 1/2 LONG SNOUTS, TRIPLE X, FACTOR 1, SAWYER, STALLARD, HYPER, PMP, CONCEPT, BAILEY, PACE, AND MANY OTHERS

Hub Assemblies


Brand New Southwest Speed Micro/mini Sprint Complete Front Axle Set With A Left Front Brake (Part # 203-9043).
The 4 Lug Direct Mount Hubs Will Fit 12 Bolt, 10" Wheels.
Includes: Keizer Polished 3 Spoke Left Front And Right Front Hubs | * Left Front Hub Includes Brake Rotor Mount | * Lightweight Hubs Weigh Only Approximately 1.7 Lbs Each | * Each Hub Includes 2 Bearings And The Dust Cap We Also Have This Setup Available With Black Hubs And 6 Spoke Hubs | * Front Axle | * Chrome Plated 4130 Chromoly | * Jig Built For Quality & Exact Fit | * 1 1/2" Diameter With 0.120" Wall Thickness | * Length: 40" Center Of King Pin Boss To Center Of King Pin Boss | * Panhard Mount: Threaded 3/8" Stud | * Tie Rod | * Plated 4130 Chromoly | * Welded/threaded Inserts | * 3/8" X 36 1/2" Long | * Tie Rod Rod Ends And Jam Nuts, 3/8", Aluminum | * Left And Right Spindles | * Polished, 6061-t6 Billet Aluminum Spindle Bodies | * Machined Aluminum Spindle Snouts | * Come Complete With Nut, Spacers, Brass Bushings, And Grease Fittings | * Spindle King Pins | * Steel Pins Come With Clips
Spindle King Pins | * Steel Pins Come With Clips | * King Pin Thrust Bearings (4) | * Sits Between 2 Thrust Washer Shims To Eliminate Wear On The Spindle And Keep Play At A Minimum | * King Pin Thrust Bearing Shims (8) | * Left And Right Steering Arms | * Polished, 2024 Aluminum Construction | * CNC Machined | * Left Front Brake Rotor | * Strong Steel Construction, Drilled To Eliminate Rotating Weight | * 7 1/8" Diameter | * 1/8" (0.125") Thick | * Weighs Only Approximately 0.9 Lbs | * Brake Caliper With Pads | * Made By MCP | * Features One 1" Piston
Features Ethyl Propylene (EP) Seals, Which Allows It To Be Used With Dot 3, Dot 4, Or Dot 5 Brake Fluid | * Weighs Only Approximately 1.2 Lbs | * Brake Caliper Mount | * Bolts On To The Top Part Of The Spindle | * MCP Caliper Bolt To It, Which Put It The Necessary Height For 7 1/8" Rotor | * Brake Rotor Bolts | * Caliper Mounting Bolts | * Caliper Bracket Bolts That Go Through The Spindle And Into The Steering Arm | * Commonly Used On Triple X, Factor 1, Sawyer, Stallard, Hyper, Pmp, Concept, Bailey, Pace, And Almost All Other Micro Chassis.

Includes: