Southwest Speed
203-9035
NEW SOUTHWEST SPEED RACING MICRO SPRINT FRONT BRAKE, HUB, AND SPINDLE KIT WITH LEFT & RIGHT SPINDLES, KING PINS, STEERING ARMS, KEIZER LIGHTWEIGHT 3 SPOKE BLACK HUBS, BRAKE ROTOR, MCP BRAKE CALIPER WITH PADS, AND CALIPER MOUNTING BRACKET WITH HARDWARE, FITS 600 MICRO / MINI-SPRINT SPINDLES WITH 1 DIAMETER X 2 1/2 LONG SNOUTS, TRIPLE X, FACTOR 1, SAWYER, STALLARD, HYPER, PMP, CONCEPT, BAILEY, PACE, AND MANY OTHERS
Hub Assemblies
Brand New Southwest Speed Micro/mini Sprint Front Hub, Spindle, And Arm Set With A Left Front Brake (Part # 203-9035).
The 4 Lug Direct Mount Hubs Will Fit 12 Bolt, 10" Wheels.
Includes: | * Keizer Black 3 Spoke Left Front And Right Front Hubs | * Left Front Hub Includes Brake Rotor Mount | * Lightweight Hubs Weigh Only Approximately 1.7 Lbs Each | * Powder-coated Black Aluminum | * Each Hub Includes 2 Bearings And The Dust Cap; As You Can See, The Dust Cap Isn't Black | * We Also Have This Setup Available With Polished Hubs Left And Right Spindles | * Polished, 6061-t6 Billet Aluminum Spindle Bodies | * Machined Aluminum Spindle Snouts | * Come Complete With Nut, Spacers, Brass Bushings, And Grease Fittings | * Spindle King Pins | * Steel Pins Come With Clips | * 0.623" Outside Diameter | * 3.850" Long
King Pin Thrust Bearings (4) | * Sits Between 2 Thrust Washer Shims To Eliminate Wear On The Spindle And Keep Play At A Minimum | * King Pin Thrust Bearing Shims (8) | * Left And Right Steering Arms | * Polished, 2024 Aluminum Construction | * CNC Machined | * Left Front Brake Rotor | * Strong Steel Construction, Drilled To Eliminate Rotating Weight | * 7 1/8" Diameter | * 1/8" (0.125") Thick | * Weighs Only Approximately 0.9 Lbs
Brake Caliper With Pads | * Made By MCP | * Features One 1" Piston | * Features Ethyl Propylene (EP) Seals, Which Allows It To Be Used With Dot 3, Dot 4, Or Dot 5 Brake Fluid Weighs Only Approximately 1.2 Lbs. | * Brake Caliper Mount | * Bolts On To The Top Part Of The Spindle | * MCP Caliper Bolt To It, Which Put It The Necessary Height For 7 1/8" Rotor | * Brake Rotor Bolts | * Caliper Mounting Bolts | * Caliper Bracket Bolts That Go Through The Spindle And Into The Steering Arm | * Commonly Used On Triple X, Factor 1, Sawyer, Stallard, Hyper, Pmp, Concept, Bailey, Pace, And Almost All Other Micro Chassis
Includes:
- Left Front Hub Includes Brake Rotor Mount
- Lightweight Hubs Weigh Only Approximately 1.7 Lbs Each
- Powder-coated Black Aluminum
- Each Hub Includes 2 Bearings And The Dust Cap; As You Can See, The Dust Cap Isn't Black
- We Also Have This Setup Available With Polished Hubs
- Left And Right Spindles
- Polished, 6061-T6 Billet Aluminum Spindle Bodies
- Machined Aluminum Spindle Snouts
- Come Complete With Nut, Spacers, Brass Bushings, And Grease Fittings
- Steel Pins Come With Clips
- 0.623" Outside Diameter
- 3.850" Long
- Sits Between 2 Thrust Washer Shims To Eliminate Wear On The Spindle And Keep Play At A Minimum
- Left And Right Steering Arms
- Polished, 2024 Aluminum Construction
- CNC Machined
- Left Front Brake Rotor
- Strong Steel Construction, Drilled To Eliminate Rotating Weight
- 7 1/8" Diameter
- 1/8" (0.125") Thick
- Weighs Only Approximately 0.9 Lbs
- Made By MCP
- Features One 1" Piston
- Features Ethyl Propylene (EP) Seals, Which Allows It To Be Used With Dot 3, Dot 4, Or Dot 5 Brake Fluid
- Weighs Only Approximately 1.2 Lbs
- Bolts On To The Top Part Of The Spindle
- MCP Caliper Bolt To It, Which Put It The Necessary Height For 7 1/8" Rotor
- Caliper Bracket Bolts That Go Through The Spindle And Into The Steering Arm
Keizer Black 3 Spoke Left Front And Right Front Hubs
Caliper Mounting Bolts
2008 Jaguar X-Type - Spray Paint: Paint Only - Ultimate Black Pearl 2103/PEL
CF11777 Fresh Breeze Filter Hammer
Mix me 1321