UPGR8

U4204-05

Upgr8 5 Feet Length Stainless Steel Braided Fuel / Oil / Gas Line Hose (-4AN, Silver)

EAN: 0849250009322

UPC: 849250009322

Fuel

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil & coolant etc
Size: AN4; Length: 5 Feet (60 Inch)
Inner Diameter: 0.22" / 5.56mm. Outside Diameter: 0.44" / 11.18mm
Working Pressure: 1000 PSI / 69 Bar; Burst Pressure: 6000 PSI / 420 Bar
Operating temperature: -40 Degree F to +350 Degree F

This hose is made to resist extreme heat, abrasion and corrosion. It offers superior flexibility & bending with maximum vacuum service.

Material:

* Inner hose: CPE synthetic rubber.

* The middle layer: 304 stainless steel wire mesh sleeve.

* The outer layer: 304 stainless steel wire.

How to Cut:

For cutting your new steel braided hose to length you will need:

* cutting wheel/ hack saw/ or steel braided hose cutters

* duct tape or electrical tape (work best)

1. Measure your hose and find desired length.

2. Tape hose at measured length needed for application.

3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)

4. Remove the tape.

5. Slide one end of hose into end of fitting.

6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.

7. Make sure all connection are tight.

Straight -4AN Swivel Hose End Full Flow Steel Braided Black 4 AN Flare, 9010-04B
Upgr8 Universal Aluminum Oil / Fuel / Water / Fluid / Air Line Hose End Fitting (-4AN Swivel, 90 Degree Black)
90 Degree -4AN Swivel Hose End Full Flow Steel Braided Black 4 AN Flare, 9090-04B
Straight -10AN Swivel Hose End Flare Steel Braided Black 10 AN, 9010-10B
Edelbrock/Russell 660420 Blue Anodized Aluminum -4AN Flare to 1/8 NPT Pipe Straight Adapter
Raybestos MC390633 Professional Grade Brake Master Cylinder
Toyota 90910 C2005 Bolt Crankshaft Bearing 90910-C2005
Mix me 4627