UPGR8

U4208-04

Upgr8 5 Feet Length Nylon Steel Braided Fuel / Oil / Gas Line Hose (-8AN, Black)

EAN: 0849250009353

UPC: 849250009353

Fuel

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil & coolant etc
Size: AN8; Length: 5 Feet (60 Inch)
Inner Diameter: 0.44" / 11.12mm. Outside Diameter: 0.68" / 17.20mm
Working Pressure: 500 PSI / 34.5 Bar; Burst Pressure: 2000 PSI / 138 Bar
Operating temperature: -40 Degree F to +350 Degree F

This hose is made to resist extreme heat, abrasion and corrosion. It offers superior flexibility & bending with maximum vacuum service.

Material:

* Inner hose: CPE synthetic rubber.

* The middle layer: 304 stainless steel wire mesh sleeve.

* The outer layer: High quality braided nylon.

How to Cut:

For cutting your new steel braided hose to length you will need:

* cutting wheel/ hack saw/ or steel braided hose cutters

* duct tape or electrical tape (work best)

1. Measure your hose and find desired length.

2. Tape hose at measured length needed for application.

3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)

4. Remove the tape.

5. Slide one end of hose into end of fitting.

6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.

7. Make sure all connection are tight.

90 Degree -8AN Swivel Hose End Flare Steel Braided Black 8 AN, 9090-08B
Straight -8AN Swivel Hose End Flare Steel Braided Black 8 AN, 9010-08B
Straight -8AN Flare Male to 3/8NPT Pipe Adapter Fitting Black 8 AN, AN816-08-06B