UPGR8

U4206-04

Upgr8 5 Feet Length Nylon Steel Braided Fuel / Oil / Gas Line Hose (-6AN, Black)

EAN: 0849250009339

UPC: 849250009339

Fuel

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, motor oil & coolant etc
Size: AN6; Length: 5 Feet (60 Inch)
Inner Diameter: 0.34" / 8.73mm. Outside Diameter: 0.56" / 14.22mm
Working Pressure: 500 PSI / 34.5 Bar; Burst Pressure: 2000 PSI / 138 Bar
Operating temperature: -40 Degree F to +350 Degree F

This hose is made to resist extreme heat, abrasion and corrosion. It offers superior flexibility & bending with maximum vacuum service.

Material:

* Inner hose: CPE synthetic rubber.

* The middle layer: 304 stainless steel wire mesh sleeve.

* The outer layer: High quality braided nylon.

How to Cut:

For cutting your new steel braided hose to length you will need:

* cutting wheel/ hack saw/ or steel braided hose cutters

* duct tape or electrical tape (work best)

1. Measure your hose and find desired length.

2. Tape hose at measured length needed for application.

3. Cut hose threw the tape you have placed. (This keep the steel braid from fraying.)

4. Remove the tape.

5. Slide one end of hose into end of fitting.

6. Insert the other half of fitting into the hose and begin to push and screw the fitting together.

7. Make sure all connection are tight.

Russell 610025 Black 6-AN Full Flow Hose End
Straight -6AN Swivel Hose End Full Flow Steel Braided Black 6 AN Flare, 9010-06B
90 Degree -6AN Swivel Hose End Flare Steel Braided Black 6 AN Flare, 9090-06B
Upgr8 Universal Aluminum Oil / Fuel / Water / Fluid / Air Line Hose End Fitting (-6AN Swivel, 90 Degree Black)
Russell 610165 Black Full Flow Hose End
Radiator-1990-87 Chevrolet
Perfect Fit Group REPM310194 S Class
Mix me 1730