ABN

9210

ABN 11.5” Inch Strut Spring Compressor Tool – Set of 2 (Pair) – MacPherson Spring Compression, 13/16” Socket 1/2 Drive

EAN: 0617209839210

UPC: 617209839210

Suspension Tools

EASY TO USE: Use the ABN 11.5" Inch Strut Spring Compressor Tool - Set of 2 (Pair) - MacPherson Spring Compression, 13/16" Socket 1/2" Drive to compress the coil spring to replace the shock absorber unit or spring; For repairs on bent struts, strut tubes, and damaged pieces; Easy and super-fast setup; Attach the brackets completely onto the spring, tighten, and remove the strut; Lubricate threads with anti-seize compound for prolonged life
LOCKS INTO PLACE: Acme threaded rod with broad spring contact and built-in detent pins to lock the coil spring in place for safer spring compression; Acme threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools
WIDE RANGE OF COMPATIBILITY: Universally compatible with struts assembly that remove from the vehicle to transfer the old spring on the new strut; Hex-shaped end for a 13/16-inch wrench or socket and allows a 1/2-inch extension for adjustment if the strut is too close to the tool; 11.5-inch threaded rods for 10-inch to 10.5-inch maximum opening to fit jaws to coils (Wide jaws with standard diameter of approximately 6 inches OD front coil springs)
BUILT TO LAST: Constructed with forged hooks and center screw hardened for maximum strength and longevity; Designed to withstand extreme pressure in any environment; For professional use
EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization

If rough roads have you down, the ABN 11.5" Inch Strut Spring Compressor Tool - Set of 2 (Pair) - MacPherson Spring Compression, 13/16" Socket 1/2" Drive is a safe and easy way for you to replace the springs and the struts on your vehicle when your ride is not smooth. It takes tension off to safely remove strut and spring assembly. Quickly and safely compresses the coil spring for replacing a shock absorber unit or spring as well as allowing safe and easy repairs on bent struts, strut tubes, and damaged pieces. This compressor is universal for struts assembly that remove from the vehicle to transfer the old spring on the new strut and can be used with a 13/16-inch socket or 1/2-inch drive. Package includes a pair (2) of compressors and carrying case.

ACDelco 580-435 GM Original Equipment Front Shock Absorber