Parts Motobriiz 1100ND-1/4

Motobriiz

1100ND-1/4

Motobriiz 1100ND-1/4 - Wind Powered Automatic Chain Oiler with Applicator 1/4-inch

Parts


Automatically dispense oil to your chain using the most plentiful natural resource available to a motorcycle, the wind ; Greatly extend your chain life and reduce the frequency of cleaning required to save you time and money ; Helps protect your chain and sprockets from excessive wear making them last much longer ; A Motobriiz oiler will pay for itself on your first sprocket/ chain set
No pumps, motors, electrical or vacuum connections are required for maximum reliability and easy universal installation; Requires a small space under your seat (Approximately 3-1/2-by-1-1/2-by-1-1/2-inch), a location at the front of your bike to mount the inlet tube, and a swing arm chain slider to mount the chain applicator
Replaceable high density felt applicator applies a thin film of oil to your chain ; Replacement interval is approximately 5,000 miles ; Controlled oil delivery (Approximately 1 drop every 2 miles) with minimal fling ; Side plates of your chain wear into the felt until the roller makes contact conforming the applicator to the shape of your chain
Uses any oil (e.g. gear oil, motor oil, bar and chain oil) ; Dry wax lubes are not recommended ; You will have no more need for expensive cans of chain lubes or messy sessions of spraying it on ; Just fill the Motobriiz oiler reservoir and ride
Includes Reservoir Assembly with quick connect fittings which allow easy removal for refilling, 6-foot Intake Tube with adhesive mount, 3-foot discharge tube, chain applicator with adhesive and alcohol prep pad, and an oil absorbent mat ; Chain applicators available in 1/4, 3/8, 1/2, and 5/8-inch thicknesses; See images for sizing guide

The patent pending Motobriiz motorcycle chain oiler harnesses the power of the wind to automatically dispense lubricant to your chain at a controlled rate. The intake tube mounts at the front of your bike and channels dynamic air pressure created by the wind to the Motobriiz reservoir mounted under your seat. The reservoir controls the air pressure and meters the oil into a discharge tube which delivers it to your chain via an applicator, which is securely mounted to your swing arm chain slider using an oil resistant adhesive compound. The applicator applies a thin film of oil to the inside radius of your chain. Centrifugal force distributes the oil to the pins, rollers, and bushings as the chain links circle the sprockets. When the bike stops, the reservoir pressure dissipates and the oil flow stops. Just fill the reservoir with less than 1 ounce of oil and ride for more than 1,000 miles before refilling.

Goldfren 29312AD 1 FRONT BRAKE PAD SET FITS: 2001-05 GILERA DNA 50 (Heng Tong Caliper)
Fleece Performance Engineering FPE INJ SET 67 135 Injector FPE-INJ-SET-67-135
Mix me 4734