Southwest Speed

78100

NEW RAM HYDRAULIC THROWOUT BEARING FOR RACING MINI-CLUTCHES, WITH STUDS, CLUTCH

Counter Shafts

Brand New Ram Hydraulic Throwout Bearing for Racing Clutches (Ram Part #78100).
Compatible with most reduced diameter racing style, multi-disc mini-clutches, including Ram, Quarter Master, and Tilton.
* Won't work with stock-size (10.5", 11", etc) clutches, or with Ram coupler clutches * Works with Saginaw, Muncie, GM T-10, & Jerico transmissions, as well as any transmission that has a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380" * Will not fit T-5 or non-GM T-10 transmissions
Installs by simply removing the bearing retainer bolts and replacing them with the studs, which are included. * Includes 8 different installation studs, four 5/16"-18 and four 3/8"-16, along with the nuts.
Also includes the inlet fitting and the bleeder screw.

Brand New Ram Hydraulic Throwout Bearing for Racing Clutches (Ram Part #78100).

• Compatible with most reduced diameter racing style, multi-disc mini-clutches, including Ram, Quarter Master, and Tilton

• WILL NOT work with stock-size (10.5", 11", etc) clutches, or with Ram coupler clutches

• Works with Saginaw, Muncie, GM T-10, & Jerico transmissions, as well as any transmission that has a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380"

• WILL NOT fit T-5 or non-GM T-10 transmissions

• Installs by simply removing the bearing retainer bolts and replacing them with the studs, which are included

• Includes 8 different installation studs, four 5/16"-18 and four 3/8"-16, along with the nuts

• Also includes the inlet fitting and the bleeder screw



"If You Don't Buy From Us, We Both Lose! ~ SouthwestSpeed.com

Mitsubishi Cordia Automotive Touch-Up Paint Touch Up EcoPen - Nevada Sand Metallic H23 - Essential Package
Covingtons Cover Twincam Finned C1295 B 0940-1347
Mix me 2411