BXST

BX-W005

BXET Winch Remote Control

EAN: 0657692699090

UPC: 657692699090

Remote Control Systems

work voltage: DC12V/24V/48V
the receiving distance: 100FT
supporting choices: single launch dual-optional
Works with most Winches
FCC/CE

Wireless Remote Control Instructions
BXST wireless remote works lets you operate your winch from up to 100 ft without cables or switches. Just press the remote transmitter and you're ready to operate your winch Start, stop, in or out.
◆ Remote range up to 100 ft.
◆ Transmitter equipped with long life.
◆ battery and power saver circuit.
◆ transmitter & receiver.
◆ Visual indicator light shows remote operation.
◆ Additional transmitters available to operate receiver.
◆ Installs in minutes.
◆ Transmitter replacement battery readily available.
WARNING: The Wireless Remote is designed for use on front mount self-recovery winches only. The remote is not designed for and should not be used on winches or hoists in industrial applications (commercial car haulers/carriers, wreckers, cranes, etc.) or for any other remote controlled applications. Part List:
1. one transmitter.
2. one receiver with three or four cores of line with connector.
We suggest operate your winch as follows:
1. Disengage the clutch of your winch.
2. Pull out the winch wire rope about 1.5 meters.
3. Reengage the clutch of your winch.
4. Insert the plug of remote control recever into the winches' solenoid control box female connector, if your wireless remote control is －03 type, you should properly connect the black earth line to the battery negative.
5. Put your receiver at a certain place.
6. Keep the antenna of receiver out and straight.
7. Pull out the antenna of transmitter, and move down the cover of your transmitter, bare out the control button.
8. Press the button, you can operate your winch start, stop, in and out.


K&N E-2734 High Performance Replacement Air Filter
Standard Motor Products RC9 Capacitor
Mix me 1256