OPT

OPT-2800

Optimum Gloss-Coat Paint Coating

EAN: 0082045632002

UPC: 082045632002

Sealants

Optimum Gloss-Coat can be applied to:
Painted surfaces
Wheels
Plastic trim
Bumpers. Aluminum & chrome surfaces. It is not recommended for glass since improper application can affect visibility. 10 cc

Optimum Gloss-Coat is a high-tech polymer system that forms an extra layer of clear coat over painted surfaces, wheels, plastic trim, bumpers, aluminum, and chrome. Formulated by award-winning Dr. David Ghodoussi, Optimum Gloss-Coat is designed to provide unsurpassed resistance to etching caused by harsh detergents, and swirl marks that are often inflicted during the wash process. Because Optimum Gloss-Coat is semi-permanent, the paint finish has to be properly prepared before applying it. Any blemishes or contamination on the paint will be locked in so remove them first! On a properly prepared paint finish, Optimum Gloss-Coat will look clear, smooth, and clean. Directions: 1. Polish paint with Optimum Polish II or Optimum Hyper Polish to remove any defects. 2 .Clean surface with 15% IPA solution to remove all polishing oils, waxes, and silicones. 3. Prime the applicator by making an X pattern across the pad. Only a few drops will be needed for each subsequent panel. 4. Wipe Optimum Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction. 5. Within 5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear. 6. Use foam applicator or paint safe microfiber to even out any areas where you see streaks. This step is key, as any spots not leveled will have to be polished if allowed to cure. Panels will feel a bit tacky and will be self-leveling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results. 7. Repeat steps 1-6 for each panel where application is desired. 10 cc

SO RS3C ZYC SS/SS CF DUL CBR11
JRL Cylinder Piston Magnum Chainsaws Am-MH1226
Mix me 518