Venhill

U01-4-150-BK

Venhill U01-4-150-BK Universal Motorcycle Dual Throttle Cable Kit

Throttles

High-quality, "build-your-own" cable kit suitable for generally any motorcycle throttle application with a "push-pull" style, two cable throttle.
This is a practical, durable kit for building your own throttle cables for a custom chopper, a unique classic, a show project, or a vintage race bike.
The conduit is spiral wound steel covered with tough black PVC.
The inner liner is TeflonTM for smooth action and zero maintenance.
The wire is galvanized steel for long life and easy soldering.

The ends of the inner wires are fitted with a carb nipple (nominally 3mm dia x 3mm). The opposite end will need to be cut to length and the required nipple soldered into place. The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side. You will need a basic soldering kit and basic soldering skills to solder the nipple into place.

The throttle kit includes:

2 x 1.35 meters (4.4 feet/4 feet 4.8 inches/54.8 inches) of 6mm OD black PVC coated, spiral wound, Teflon lined outer conduit

2 x 2 meters (6.5 feet/6 feet 6 inches/78 inches) of 1.5mm OD galvanized steel wire (7 x 7 strand)

2 ferrule bends with joint nut, "Honda"

2 ferrule bends, zinc coated

2 ferrules, 5mm OD nose

2 ferrules, 6.5mm OD nose

2 6mm x 1.25 x 32mm adjusters

2 neoprene adjuster boots

1 brass barrel nipples, 6mm DIA x 10mm (2.1mm bore)

1 brass barrel nipples, 6mm DIA x 8mm (2.1mm bore)

2 solderless barrel nipples, 6mm DIA x 8mm

2 solderless barrel nipples, 5mm DIA x 7.5mm

2007 Ford Explorer Replacement Keyless Entry Remote Key Fob w/ DIY Programmin...
Bosch 1124034660 BOSCH Alternator Rotor
Mix me 3711