Venhill

U01-1-100-BK

Venhill U01-1-100-BK Unversal Motorcycle Clutch Cable Kit

Complete Clutch Sets

High-quality, "build-your-own" cable kit suitable for generally any motorcycle clutch application
This is a practical, durable kit for building your own clutch cable for a custom chopper, a unique classic, a show project, or a vintage race bike.
The conduit is spiral wound steel covered with tough black PVC
The inner liner is TeflonTM for smooth action and zero maintenance.
The wire is galvanized steel for long life and easy soldering.

One end of the inner wire is fitted with a barrel nipple (nominally 6mm dia x 10mm). The opposite end will need to be cut to length and the required nipple soldered into place. The ferrules and adjusters are a snug fit. They may be bonded into place if preferred, or you can use a center punch to make a small indention in the side. You will need a basic soldering kit and basic soldering skills to solder the nipple into place. The Kit Includes:

1.35 meters (4.4 feet/4 feet 4.8 inches/54.8 inches) of 7mm OD black PVC coated, spiral wound, Teflon lined outer conduit

1.6 meters (5.25 feet/5 feet 3 inches/63 inches) of 2mm OD galvanized steel wire (1 x 19 strand)

1 ferrule, 6.5mm OD nose

1 ferrule, 7mm OD nose

1 ferrule, 8mm OD nose

1 neoprene adjuster boot

1 brass barrel nipple, 8mm DIA x 9mm

1 brass barrel nipple, 6mm DIA x 10mm (2.1mm bore)

1 brass trumpet nipple, 6mm -> 3.5mm OD, 2.5 ID, 9.5mm length

1 N8 nylon nipple sleeve, 8mm OD

1 N10 nylon nipple sleeve, 3/8" OD

94 95 96 97 98 99 00 01 Acura Integra HPS Silicone Radiator Hose Kit Red
Crown Automotive Replacement Starter Bushing 119833
Mix me 3252