ATV Engineering

atvWS290

ATV Engineering 4pc | 2.5 (1.25 per side) | 5X4.5 to 5x4.75 | Wheel Spacers Adapters | 12X1.5

Wheel Adapters & Spacers

You are receiving 4 pieces/rings with hole pattern of 5x4.5 or 5x114.3mm for the rim to attach and a bolt patter for your wheel of 5x4.75" or 5x120.7mm
Studs are M12-1.5" and there is a 74.1mm center bore. If your lug nuts are different for your wheel, you could need to purchase new lugs.
Thickness is 1.25" per spacer for 2.5" wheel to wheel stance increase!
Our studs protrude 1.3" from the spacer as your factor lugs extend from your rims.

You are buying a set of 4 automotive wheel adapters (and spacers), enough to widen one axle 2.50" total wheel to wheel at 1.25" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 2.50" ATV wheel spacers are 1.25" per side and will fit most any vehicle with a 5 x 4.5" wheel stud pattern where you are trying to use 5x4.75" WHEELS.

Please measure your studs (4.50" diagonally two studs apart) first to be sure on your vehicle, then measure your wheels (4.75" diagonally two holes apart) to ensure they will fit. The list below shows many of the applications of the 5x4.5 bolt pattern, but remember to check your wheels to as this is a conversion kit, not just a spacer. Please look for your vehicle!

Highlights Of Fitment: See list below for make and years, but please measure your vehicle.

For specific model years:

Dodge
- Dakota 87-90

Ford
- Crown Victoria 92-11
- Edge 12-14
- Explorer 91-15
- Explorer Sport Trac 01-10
- Five Hundred 05-07
- Flex 09-15
- Freestar 05-07
- Mustang 94-15
- Ranger 84-11

Jeep
- Cherokee 84-01
- Comanche 86-92
- Grand Cherokee 93-98
- Liberty 02-06
- TJ 97-06
- Wrangler 87-06

Lincoln
- Town Car 82-10

Mazda
- B2500 98-01
- B3000 94-08
- B4000 94-10
- Navajo 91-94

Mercury
- Mountaineer 97-10



New John Deere Farm Tractor Starter Lawn Equipment 12.5hp Riding Mower 128000-2890 128000-6550
Toyota 44610 12D81 Power Brake Booster 44610-12D81
Mix me 4048