Southwest Speed

JYJ8795X-K7

Currie JYJ8795X-K7, 87-95 Jeep Wrangler YJ Rear End with Wilwood Disc Brakes, 11 Drilled Rotors, Red Calipers, Brake Lines, Parking Brake Cables, Axles, & Bearings, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Jeep Wrangler

Rotors

Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors & Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #JYJ8795X-K7). Currie Crate Rear Ends are designed to be a bolt-in upgrade.
Fits: Jeep: 1987-1995 YJ Wrangler, including Sahara, Renegade, Laredo, Rio Grande.
Built to the stock overall width (60") and pinion offset specs 60" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on. Heavy duty 2 1/4" wide leaf spring pads and stock style shock mounts are included, but not installed on the unit so that you may set the correct pinion angle of the unit before welding them on. No trac bar mounting provisions on housing; Trac bar may be removed Housing includes all 3rd member studs installed.
These are 9" Ford center sections, so they do require a 9" Ford 3rd Member (sometimes referred to as a Chunk); if you don't currently have one, we do offer them in several ratios. The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino", which fit the Wilwood brakes perfectly.
Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part #140-11389-DR): Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axle. Forged billet Dynapro Low-Profile four-piston calipers, 11" one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking These Low-Profile Brake kits require at least 15" diameter wheels.

Includes:

Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-JYJ8795X)

• 9-Plus notchback heavy duty housing

• 31 Spline performance axle package

Axles include

• Axles are drilled for both 5 x 4 1/2" and 5 x 5 1/2" wheel bolt patterns

• Wheel studs installed in the stock 5 x 4 1/2" pattern

• 1/4" Thick heavy-duty bearing retainer plates

• Tapered Timken style wheel bearings pressed on

Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part #140-11389-DR)

Brake Kit includes

• Drilled & Slotted, .810" Thick x 11.00" O.D. Rotors with Hats

• Featuring 5 x 4 1/2", 5 x 4 3/4", and 5 x 5" bolt patterns

• Low-Profile 4 Piston Dynapro Calipers - Red

• Drum Parking Brake Assemblies with Caliper Mounting Brackets

• Bearing Retainers

• BP-10 Smart Compound Brake Pads

• All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels

Parking Brake Cable Kit

• Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission

Flexline Kit

• Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines

• Also includes weld-on line tabs to install on your rear end

Hard Line Kit

• Steel hard brake line tubing to connect the chassis fittings to the included rubber hose

• Rubber hose connects those hard lines to the line on the frame

• Note:Tubing bending is generally necessary for the installation of these lines

Magnum ECOMASTER Fuel Gas Saver Chip Ssangyong Kyron 2.3L - 10 Year Warranty
Nissan Frontier Xterra Transmission Engine 4314
Mix me 91