Southwest Speed

GMF8292X-K7

CURRIE GMF8292X-K7, 82-92 GM F-BODY REAR END WITH WILWOOD DISC BRAKES, 11 DRILLED ROTORS, RED CALIPERS, BRAKE LINES, PARKING BRAKE CABLES, AXLES, & BEARINGS, 1982 - 1992 CHEVY CAMARO & PONTIAC FIREBIRD

Rotors

Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors & Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMF8292X-K7). Currie Crate Rear Ends are designed to be a bolt-in upgrade.
Fits: Chevrolet: 1982-1992 Camaro Pontiac: 1982-1992 Firebird
Built to the stock overall width (61 7/8") and pinion offset specs 61 7/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
These are 9" Ford center sections, so they do require a 9" Ford 3rd Member (sometimes referred to as a Chunk); if you don't currently have one, we do offer them in several ratios. The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino".
Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part #140-11389-DR): Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axle. Forged billet Dynapro Low-Profile four-piston calipers, 11" one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking These Low-Profile Brake kits require at least 15" diameter wheels

Includes

Currie F9 Fabricated Rear End with 31 Spline Axles (#CE-GMF8292X)

F9 Fabricated heavy duty housing

31 Spline performance axle package

All stock suspension brackets are installed in the stock location for an easy bolt in installation including a heavy duty torque arm bracket that is removable so that 3rd member may be removed for service.

Housing includes all 3rd member studs installed

Axles include

Stock 5 x 4 3/4" wheel bolt pattern

12mm Wheel studs installed

1/4" Thick heavy-duty bearing retainer plates

Tapered Timken style wheel bearings pressed on

Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (#140-11389-DR)

Brake Kit includes

Drilled & Slotted, .810" Thick x 11.00" O.D. Rotors with Hats

5 x 4 1/2", 5 x 4 3/4", and 5 x 5" bolt patterns

Low-Profile 4 Piston Dynapro Calipers - Red

Drum Parking Brake Assemblies with Caliper Mounting Brackets

Bearing Retainers

BP-10 Smart Compound Brake Pads

All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels

Parking Brake Cable Kit

Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission

Flexline Kit

Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines

Also includes weld-on line tabs to install on your rear end

Hard Line Kit

Steel hard brake line tubing to connect the chassis fittings to the included rubber hose

Rubber hose connects those hard lines to the line on the frame

Note:Tubing bending is generally necessary for the installation of these lines

OE Replacement Chevrolet Silverado/GMC Sierra Rear Gate Shell (Partslink Number GM1900115)
90000000502 1179481 17X9 8X6 50 BLACK
Mix me 976