Southwest Speed
GMF6769M-K2
CURRIE CUR-GMF6769M-K2, 67-69 GM F-BODY REAR END WITH DISC BRAKES, BRAKE LINES, PARKING BRAKE CABLES, AXLES, & BEARINGS, MULTI LEAF, 1967, 1968, 1969 CHEVY CAMARO & PONTIAC FIREBIRD WITH MULTI-LEAF SPRINGS
Calipers Without Pads
Currie Enterprises Rear End with 31 Spline Axles with Currie Disc Brake Kit, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMF6769M-K2). Currie Crate Rear Ends are designed to be a bolt-in upgrade.
Fits: Chevrolet: 1967-1969 Camaro with Multi-Leaf Springs and Without Staggered Shocks*** Pontiac: 1967-1969 Firebird with Multi-Leaf Springs and Without Staggered Shocks***
Built to the stock overall width (60 1/4") and pinion offset specs. 60 1/4" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
These are 9" Ford center sections, so they do require a 9" Ford 3rd Member (sometimes referred to as a Chunk); if you don't currently have one, we do offer them in several ratios. The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino", which fit the Currie brakes perfectly.
Currie 11" Disc Brake Kit (Currie Part #CE-6012E6): Currie brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. These Brake kits require at least 15" diameter wheels.
Includes:
Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-GMF6769MX)
9-Plus notchback heavy duty housing
31 Spline performance axle package
Built to the stock overall width (60 1/4") and pinion offset specs
Heavy duty reproductions of the stock GM multi leaf spring pads are installed in the stock location for an easy bolt in installation
Housing includes all 3rd member studs installed
Axles include
Stock 5 x 4 3/4" wheel bolt pattern
Wheel studs installed
1/4" Thick heavy-duty bearing retainer plates
Tapered Timken style wheel bearings pressed on
Currie 11" Disc Brake Kit (Currie Part #CE-6012E6)
Brake Kit includes
0.50" Thick x 11.00" O.D. Solid Rotors with Hats
Featuring both 5 x 4 1/2" and 5 x 4 3/4" bolt patterns
Single Piston Brake Calipers with Pads
Backing Plate / Caliper Mounting Bracket Plates with Drum-Style
Parking Brake Assemblies installed
Necessary bolts, nuts, and registers to install the braking system on both rear wheels
Parking Brake Cable Kit
Connects to the Currie Parking Brake Assemblies, then comes together to join the stock cable behind the transmission
Flexline Kit
Steel braided brake lines, banjo fittings & bolts, and chassis fittings to connect the calipers to the hard lines
Also includes weld-on line tabs to install on your rear end
Hard Line Kit
Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
Rubber hose connects those hard lines to the line on the frame
Note:Tubing bending is generally necessary for the installation of these lines
What Would Jesus Do WWJD Christian Bumper Sticker
VMS Racing GUNMETAL DIPSTICK Aluminum 100-ERPDH001GM
Mix me 2774