Southwest Speed

GMF6769S-S7

NEW CURRIE 67-69 GM STAGGERED SHOCK F-BODY REAR END WITH WILWOOD DISC BRAKES, 12 DRILLED ROTORS, RED CALIPERS, BRAKE LINES, PARKING BRAKE CABLES, AXLES, & BEARINGS, MONO LEAF, 1967, 1968, 1969 CHEVY CAMARO & PONTIAC FIREBIRD WITH MONO-LEAF SPRINGS & STAGGERED SHOCKS

Calipers Without Pads

Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including 12" Drilled Rotors & Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMF6769S-S7). Currie Crate Rear Ends are designed to be a bolt-in upgrade.
Fits: Chevrolet: 1967-1969 Camaro with Mono-Leaf (Single Leaf) Springs and With Staggered Shocks*** Pontiac: 1967-1969 Firebird with Mono-Leaf (Single Leaf) Springs and With Staggered Shocks*** "Staggered Shock" applications have the Left side shock in back of the rear end housing and the Right side shock in front. In these applications, it's necessary to have this modified Left side brake kit, which mounts the caliper in front of the housing to avoid any clearance issues with the shock.
Built to the stock overall width (60 1/4") and pinion offset specs 60 1/4" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino", which fit the Wilwood brakes perfectly.
Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. These Big Brake kits require at least 16" diameter wheels.

Includes:

Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-GMF6769SX)

9-Plus notchback heavy duty housing

31 Spline performance axle package

Heavy duty reproductions of the stock GM mono leaf spring pads are installed in the stock location for an easy bolt in installation

Housing includes all 3rd member studs installed

Axles include

Stock 5 x 4 3/4" wheel bolt pattern

Wheel studs installed

1/4" Thick heavy-duty bearing retainer plates

Tapered Timken style wheel bearings pressed on

Wilwood 12" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part #140-9315-DR)

Brake Kit includes

Drilled & Slotted, .810" Thick x 12.19" O.D. Rotors with Hats

Featuring 5 x 4 1/2", 5 x 4 3/4", and 5 x 5" bolt patterns

Forged Dynalite 4 Piston Calipers - Red

Drum Parking Brake Assemblies with Caliper Mounting Brackets

Bearing Retainers

BP-10 Smart Compound Brake Pads

All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels

Parking Brake Cable Kit

Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission

Flexline Kit

Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines

Also includes weld-on line tabs to install on your rear end

Hard Line Kit

Steel hard brake line tubing to connect the chassis fittings to the included rubber hose

Rubber hose connects those hard lines to the line on the frame

Note:Tubing bending is generally necessary for the installation of these lines

Bell Intercooler Core, Air-to-Air, 4.5 D x 18.2 H x 8 W, 1536 CFM
CXRacing Universal Intercooler Aluminum Silicone 10952005078
Mix me 1195