Southwest Speed

GMF6769M-K1

NEW CURRIE 67-69 GM F-BODY REAR END WITH 11 DRUM BRAKES, BRAKE LINES, PARKING BRAKE CABLES, AXLES, & BEARINGS, MULTI LEAF, 1967, 1968, 1969 CHEVY CAMARO & PONTIAC FIREBIRD WITH MULTI-LEAF SPRINGS, CUR-GMF6769M-K1

Calipers Without Pads

Currie Enterprises Rear End with 31 Spline Axles with Currie 11" Drum Brake Kit, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part #GMF6769M-K1). Currie Crate Rear Ends are designed to be a bolt-in upgrade.
**Fits:** Chevrolet: 1967-1969 Camaro with Multi-Leaf Springs Pontiac: 1967-1969 Firebird with Multi-Leaf Springs
Built to the stock overall width (60 1/4") and pinion offset specs. 60 1/4" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
These are 9" Ford center sections, so they do require a 9" Ford 3rd Member (sometimes referred to as a Chunk); if you don't currently have one, we do offer them in several ratios. The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino".
Currie 11" Hydraulic Drum Brake Kit (Currie Part #CE-6005AD): Currie brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.

Includes:

Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie #CE-GMF6769MX)

9-Plus notchback heavy duty housing

31 Spline performance axle package

Built to the stock overall width (60 1/4") and pinion offset specs
** 60 1/4" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on

Heavy duty reproductions of the stock GM multi leaf spring pads are installed in the stock location for an easy bolt in installation

Housing includes all 3rd member studs installed

Axles include

Stock 5 x 4 3/4" wheel bolt pattern

Wheel studs installed

1/4" Thick heavy-duty bearing retainer plates

Tapered Timken style wheel bearings pressed on

Currie 11" Hydraulic Drum Brake Kit (Currie Part #CE-6005AD)

Currie brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications.

Brake Kit includes

11" Hydraulic Drums

5 x 4 3/4" Bolt Pattern

2 1/4" x 11"

2.80" Center Register Hole

Includes Cable Operated Parking Brake Mechanisms

Parking Brake Cable Kit

Connects to the Currie Parking Brake Assemblies, then comes together to join the stock cable behind the transmission

Hard Line Kit

Steel hard brake line tubing to connect the Currie drums to the included rubber hose

Rubber hose connects those hard lines to the line on the frame

Note:Tubing bending is generally necessary for the installation of these lines

"If You Don't Buy From Us, We Both Lose! ~ SouthwestSpeed.com

APA Air Pump Rubber Mount
Walker Products 240 91041 Vehicle Sensor 240-91041
Mix me 1871