Southwest Speed
CUR-FDM0507X-K9
NEW CURRIE 05-13 MUSTANG REAR END WITH WILWOOD DISC BRAKES, 13 DRILLED ROTORS, RED CALIPERS, BRAKE LINES, PARKING BRAKE CABLES, AXLES, & BEARINGS, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 FORD MUSTANG
Rotors
Brand New Currie Enterprises Rear End with 31 Spline Axles with Wilwood 13" Disc Brake Kit including Drilled Rotors & Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # FDM0507X-K9). | * Currie Crate Rear Ends are designed to be a bolt-in upgrade. | * Fits: | * 2005 - 2013 Ford Mustang
Includes: | * Currie F9 Fabricated Rear End with 31 Spline Axles (Currie # CE-FDM0507X) | * F9 Fabricated heavy duty housing | * 31 Spline performance axle package | * Built to the stock overall width (66 1/8") and pinion offset specs | * 66 1/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on | * Stock suspension brackets are installed in the stock location for an easy bolt-in installation, including a heavy-duty upper control arm bracket with Johnny Joint rod installed | * Housing includes all 3rd member studs installed | * These are 9" Ford center sections, so they do require a 9" Ford 3rd Member (sometimes referred to as a Chunk); if you don't currently have one, we do offer them in several ratios | * Axles include: | * Stock 5 x 4 1/2" wheel bolt pattern | * Wheel studs installed | * 1/4" Thick heavy-duty bearing retainer plates | * Tapered Timken style wheel bearings pressed on | * The Axle flanges on this rear end are the Big Bearing Ford (New Style), also known as "Torino", which fit the Wilwood brakes perfectly
Wilwood 13" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-9219-DR): | * Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. | * Billet Superlite 4 Radial rear disc kits provide the ultimate Big Brake solution for popular muscle car rear axles that require a parking brake. Billet SL4R four piston calipers, 13" two-piece rotors, and high performance BP-10 compound pads provide optimized and balanced braking to compliment front big brake upgrades on all types of custom, show and high performance street machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. | * These Big Brake kits require at least 17" diameter wheels
Brake Kit includes: | * Drilled & Slotted, 1.10" Thick x 12.90" O.D. Rotors with Hats | * Featuring 5 x 4 1/2", 5 x 4 3/4", and 5 x 5" bolt patterns | * Superlite 4 Piston Calipers - Red | * Brake Hats | * Caliper Mounting Brackets | * Drum Parking Brake Assemblies | * Bearing Retainers | * BP-10 Smart Compound Brake Pads | * All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels | * You can view and download the complete assembly instruction booklet for this brake kit | * This listing includes the Wilwood kit with Red Calipers and 13" Drilled Rotors
Parking Brake Cable Kit: | * Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission | * Flexline Kit: | * Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines | * Also includes weld-on line tabs to install on your rear end Hard Line Kit: | * Steel hard brake line tubing to connect the chassis fittings to the included rubber hose | * Rubber hose connects those hard lines to the line on the frame | * Note: Tubing bending is generally necessary for the installation of these lines
Includes
Currie F9 Fabricated Rear End with 31 Spline Axles (Currie #CE-FDM0507X)
F9 Fabricated heavy duty housing
31 Spline performance axle package
Stock suspension brackets are installed in the stock location for an easy bolt-in installation, including a heavy-duty upper control arm bracket with Johnny Joint rod installed
Housing includes all 3rd member studs installed
Axles include
Stock 5 x 4 1/2" wheel bolt pattern
Wheel studs installed
1/4" Thick heavy-duty bearing retainer plates
Tapered Timken style wheel bearings pressed on
Wilwood 13" Disc Brake Kit with Drilled Rotors and Red Calipers (Part #140-9219-DR)
Brake Kit includes
Drilled & Slotted, 1.10" Thick x 12.90" O.D. Rotors with Hats
5 x 4 1/2", 5 x 4 3/4", and 5 x 5" bolt patterns
Superlite 4 Piston Calipers - Red
Brake Hats
Caliper Mounting Brackets
Drum Parking Brake Assemblies
Bearing Retainers
BP-10 Smart Compound Brake Pads
All Bolts, Washers, and Shims necessary to install the complete braking system on both rear wheels
Parking Brake Cable Kit
Connects to the Wilwood Parking Brake Assemblies, then comes together to join the stock cable behind the transmission
Flexline Kit
Steel braided brake lines, caliper fittings, and chassis fittings to connect the calipers to the hard lines
Also includes weld-on line tabs to install on your rear end
Hard Line Kit
Steel hard brake line tubing to connect the chassis fittings to the included rubber hose
Rubber hose connects those hard lines to the line on the frame
NoteTubing bending is generally necessary for the installation of these lines
Genuine Honda Parts 33551-S04-A02 Driver Side Taillight Assembly
Toyota 89831 0C050 Air Sensor Assembly 89831-0C050
Mix me 1565