ATV Engineering

atvWS285

ATV Engineering 4 qty | 4 (2 per side) | 5 X 4.75 Wheel Spacers Adapters | 12X1.5| 5x4.75 2.0

Spacers

You are buying a set of 4 automotive wheel adapters (and spacers), enough to widen two axles 4.00" total wheel to wheel at 2.00" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 4.00" ATV wheel spacers are 2.00" per side and will fit most any vehicle with a 5 x 4.75 wheel stud pattern with M12x1.5 studs.

Please measure your studs' distance apart (4.75" spacing on the studs diagonally directly across from each other) first to be sure on your vehicle. The grid attached has many of the applications of the 5x4.75 bolt pattern, but remember to check your studs to be sure. Please look for your vehicle!

Highlights of fitment: Many Chevrolet, GMC and Cadillac flagship pickup models (i.e. Camaro, Corvette, Impala, S10, Sonoma and many, many more!). Please measure your vehicle on both studs and spacer size.

For specific models:

Chevrolet:
- Camaro: 1982-2002 - MAKE SURE YOUR STUDS ARE NOT 1/2". IF THEY ARE, YOU WILL NEED NEW LUG NUTS
- Caprice: 1980 - 1989
- Chevelle: 1964 - 1973
- Corvette: 1988 - 2014
- Impala: 1959 - 1970
- Nova: 1969 - 1975
- S10: 1982 - 2004 (ONLY THE 2WD, AND ONLY THE REAR)
- S10 Blazer: 1983 - 1994 (ONLY THE 2WD, AND ONLY THE REAR)

GMC
- S15: 1982 - 1990 - S15 Jimmy: 1983 - 1991 - Sonoma: 1991 - 2004 (ONLY THE 2WD, AND ONLY THE REAR)

Pontiac
- Firebird: 1967 - 2002 (ONLY THE 2WD, AND ONLY THE REAR) - GTO: 1967 - 1973 (ONLY THE 2WD, AND ONLY THE REAR)

Cadillac
- Eldorado: 1979 - 1985 - XLR: 2004 - 2009



Bell Intercooler Core, Air-to-Air, 3.5 D x 17.7 H x 8 W, 1162 CFM
WIX Filters 57195 Cartridge Hydraulic
Mix me 3569