Wotefusi

NC18

3D LED Door Welcome Step Shadow Logo Lights For Lexus LS/ES/IS/LX/RX/GS/GX

EAN: 0503497148366

UPC: 503497148366

LED & Neon Lights

Voltage: 12-18V
Wattage: 5W
Fit for:
LEXUS LS 06-14
LEXUS ES 06-13
LEXUS IS 06-13
LEXUS LX 07-13
LEXUS RX 07-13
LEXUS GS 02-14
LEXUS GX 10-14
Installation steps:
1. Take apart the door cover;
2. Drill a hole to the bottom of the door cover with a auger;
3. Put lamps fixed on the door cover;
4. Put the wire of the lamp to the positive and negative on the door;
5. Put the door cover fitted;
6 Installed.
Package Including:
2x Car 3D Door Shadow Lights
1x Hole Drill Tool


Material: CREE Epistar
Voltage: 12V-18V
Wattage: 5W
Compatible for:
LEXUS LS 06-14
LEXUS ES 06-13
LEXUS IS 06-13
LEXUS LX 07-13
LEXUS RX 07-13
LEXUS GS 02-14
LEXUS GX 10-14

Installation
1. Make sure the position for installing, It can be installed on the coaming and chassis or other right position; The best
projection distance is 40cm for the projection light.
2. Fixed the stand of the projection light on the Car with a screwdriver.
3. Adjust the lamp holder to the best position. Tighten the fixed-screw at the bottom of the light cup.
4. Connect the power cord and remote control according to the installation guide.

Package Including:
2x Car 3D Door Shadow Lights
1x Hole Drill Tool

XADO Atomic Oil ATF III/IV/V (can 1 l)
WAGAN
Mix me 3418