TipTopSIGNS

VA0022-2x5

3D Chrome Silver Carbon Fiber Vehicle Vinyl Wrap Self Adhesive Air Release Channels- Roll Size: 2 ft x 5 ft

EAN: 0601579022495

UPC: 601579022495

Decals

Self adhesive 3D carbon fiber vinyl. Simply peel and apply. Wrap your vehicle or apply to any hard smooth surface.
High quality. Realistic textured 3D carbon fiber pattern. Gloss finish.
Stands up against water, dirt, grease, salt, mild acids and oil. Can be cleaned with soap and water.
Dry application. Can be re-lifted and repositioned. NOT stretchable with heat. Vinyl has air release channels for bubble free installation. Install temperature is 70F or above.
Durability: Up to 2 yrs outdoor, 8 yrs indoor. Film thickness: 0.10mm

3D Chrome Carbon Fiber wrap vinyl has pressure-activated adhesive and air egress technolody to make installation easy. The vinyl can be repositioned and moved around during installation. Air channels beneath wrap vinyl allws for a virtual free bubble installation. No messy soap/water needed. The vinyl will add an exotic look and style to your vehicle. The vinyl can be applied to any hard smooth surface such as such as front hood, rear trunk, spoiler, rims, side mirrors, door handles, windshield, interior trim, cell phones, laptop, speakers, walls, ceilings, floors, furniture... etc. Notes: The vinyl is best use as a highlight or accent on vehicles. This wrap material is made from metallized polyester so handle it more carefully to prevent creasing. It is not stretchable (very limited) compare to regular wrap vinyl. You can easily apply 3D gold chrome carbon fiber wrap vinyl to most parts of the vehicle where the surfaces are flat or on simple curves (such as hood, roof, trunk... etc). Wrapping on compound curves such as mirror or bumper is not recommended as it may be very challenging. Adding heat with a heat gun/hair blower (test heat level first to get a feel as it is more sensitive to heat than regular vinyl) may help stretch the vinyl a little bit, but not much. Install in a clean area, away from dust and wind. Apply dry, no water needed. Application surface should be cleaned with soap and water or other cleaning agents. Cleaning agents must NOT contain ammonia (like Windex) as these will dissolve the adhesive.

Altrom 028103532A Valve Cover End Plug
UB MACHINE
Mix me 1993