Coolant Recovery Kits MILES LUBRICANTS M002001003

MILES LUBRICANTS

M002001003

Full Synthetic, Water Soluble Coolant/cutting, Miles Kool SOL SYN G , 5 Gal. Pail

EAN: 0116433221100

UPC: 116433221100

Coolant Recovery Kits


Excellent Corrosion Inhibition
Chlorine-Free
Very Low Foam
High Speed Machining
Water Extendable- Economical

General Description MILES KOOL SOL SYN-G is a heavy-duty oil-free synthetic cutting and grinding fluid concentrate designed to offer good lubricity as well as excellent corrosion control on machinery and workpieces while providing a long sump life. This product may be used on a variety of metals, including steels, cast iron and aluminum; in operations ranging from grinding to turning to milling. Application MILES KOOL SOL SYN-G has been designed for machining most metals except magnesium. Excellent on cast iron. This product may also be used for grinding: blanchard, diamond wheel, belt, disk, etc. NOTE: Since this product is completely oil-free, it may be used in most coolant mist units for machining and grinding operations. Advantages • Excellent Corrosion Inhibition • Nitrite-Free • Chlorine-Free • Phenol-Free • Very Low Foam - Excellent on High Pressure or High Speed Machining • Excellent Cooling for Ability to Maintain Close Tolerances • Tolerant of Hard Water • Resistant to Damage from Tramp Oil • Water Extendable- Economical • Long Tank Life Recommended Concentrations Application Concentration, % Ratio Refractometer Milling, Drilling, Turning 5% - 10% 1:10 - 1:20 1.4 - 2.7 Centerless, ID, OD, Surface Grinding 4% 1:25 1.1 Tapping, Sawing, Reaming 10% 1:10 2.7 Mixing Instructions When mixing coolant, it is best to use an automatic proportioner which accurately and thoroughly mixes coolant. To maintain proper concentration, make-up should be added at one-half of the desired concentration. Concentration, % 4% 5% 6% 7% 8% 9% 10% Ratio 1:25 1:20 1:17 1:14 1:12 1:11 1:10 Refractometer 1.1 1.4 1.6 1.9 2.2 2.4 2.7 Typical Properties Appea rance-Concentrate Blue liquid Appearance- Dilution Transparent Blue Residual Film Soft, soluble pH @ 20:1 9.5 ± 0.2 Specific Gravity @ 60°F 1.03 ± 0.03 Lbs/Gallon 8.6 ± 0.1 Flash point, PMCC None MILES KOOL SOL SYN-G is available in 5 gallon pails, 55 gallon drums and 275 gallon IBCs.

Tru-Tech by Standard 2965 Custom Tailored Wire Set
Steele Rubber Products 60 0121 81 window 60-0121-81
Mix me 986