Silicone Intake Systems

WAT000638

0.5 Reinforced Silicone Heater Hose, Black (per foot)

Radiator

This Silicone Heater Hose is perfect for replacing your factory engine coolant lines. Silicone is shiny and easier to clean, and looks much nicer than factory rubber hose. It is more resistant to chemicals, pressure and heat, and is more resistant to degradation and cracking compared to rubber heater hose. This silicone heater hose is also especially suited to running coolant lines to and from a turbocharger, where the coolant, surrounding air temperature, and metal attachment point might be much hotter than regular coolant passages. Here are a couple things to look out for when purchasing these silicone heater hoses. First, make sure the part is all silicone, not a rubber inner with silicone coating. Our lines are all silicone with a fabric reinforcement layer. Second, check the wall size. Ours have 0.16" walls for great pressure abilities and good resistance to cuts and nicks. Remember to order clamps based on outer diameter, which will be the inner diameter plus double the wall thickness. We recommend our stainless steel worm gear clamps for these silicone heater hoses. If you order 10 of these, we will ship you 10 feet of continuous hose. The longest length of hose we can ship is 100 feet. Compatible with either pure water or antifreeze/coolant. Temperature Compatibility: -65F to 350F Maximum Working Pressure: 65 PSI Burst Pressure: 300 PSI

Duracell DRINVM100 100W Mobile Inverter with 2.1 Amp USB Port to Charge iPads and Other Power Hungry USB Products
YearOne Wheels ZW179GUN 5 Spoke Wheel
Mix me 4684