OPT

OEM2012

Optimum (OEM2012) Mild Opti-Eraser

EAN: 0812779021298

UPC: 812779021298

Polishing & Waxing Kits

Use the dual-sided Opti-Eraser before waxing or sealing to safely remove bonded surface contamination
Will not mar when used according to directions

Optimum Opti-Eraser is an evolution of the clay bar. Use the dual-sided Opti-Eraser before waxing or sealing to safely remove bonded surface contamination. Will not mar when used according to directions. Available in Mild and Aggressive versions. Precautions: Inspect Opti-Eraser after each section and rinse as needed, When too much contamination is present to wash clean, switch to a clean side or replace your Opti-Eraser, Do not soak in liquid, Do not squeeze or wring out, Do not store flat on media surfaces (use sides), Do not store wet in air tight container. Directions: 1) Wash vehicle to remove loose dirt and debris with Optimum Car Wash or Optimum No Rinse 2) Using a sprayer, mist a small section of the vehicle with No Rinse Clay Bar Lube dilution or Opti-Clean 3) Gently work Opti-Eraser back and forth over the lubricated area until contaminates are removed and surface is smooth adding more lubrication as needed 4) Remove excess lubricant with a paint safe Optimum Microfiber Towel. 5) Repeat in sections until entire vehicle is contaminate free.

Optimum (OEA2012) Aggressive Opti-Eraser
National HM801346X Tapered Bearing Cone
XX6 SS Disc Lock Alarm Motorcycle Stainless XX6-SS
Mix me 3528