Southwest Speed
120-5498-MC
NEW WILWOOD GO KART BRAKE SET WITH CALIPER, PADS, MASTER CYLINDER, & LINE KIT FOR 1/8 ROTORS, GREAT FOR KARTING, JR. DRAGSTER, ETC, SOUTHWEST SPEED
Calipers With Pads
Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560).
Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads Commonly used on Go-Karts, Jr. Dragsters, and other small applications Wilwood's Kart /Jr. Dragster Caliper has been designed specifically for racing. A unique self retracting and adjusting piston system has been incorporated into this caliper which enables the piston to retract as the brake line pressure is reduced. The caliper can be mounted on either side of the vehicle. Weighing a meager 1.2 pounds, the caliper's lightweight billet design includes high performance, high friction brake pads. Additional features include deep cup stainless steel piston for reduced heat transfer, cotter pin, pad retainer, internal fluid passage and blue anodized finish. A specifically designed master cylinder is also available for use with this caliper. Diagram shown in image.
Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting .
5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over.
90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting installs in place of the straight fitting in the caliper to allow smoother, neater plumbing with less chance of kinking 90 Degree compression hose end 1/8" NPT Female to -3 Nylon hose.
Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560).
Kit Includes:
Wilwood Go-Kart Caliper for .125" Rotors
* Fits 0.125" Thick rotors
* Features Two 1.00" Pistons
* Weighs only 1.2 lbs.
* Comes with high friction brake pads
* Commonly used on Go-Karts, Jr. Dragsters, and other small applications
* Wilwood's Kart /Jr. Dragster Caliper has been designed specifically for racing. A unique self retracting and adjusting piston system has been incorporated into this caliper which enables the piston to retract as the brake line pressure is reduced. The caliper can be mounted on either side of the vehicle. Weighing a meager 1.2 pounds, the caliper's lightweight billet design includes high performance, high friction brake pads. Additional features include deep cup stainless steel piston for reduced heat transfer, cotter pin, pad retainer, internal fluid passage and blue anodized finish. A specifically designed master cylinder is also available for use with this caliper.
Wilwood Go-Kart Master Cylinder with a 1/2" Bore.
* 1/2" Bore.
* Weighs only .55 lbs.
* Incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring.
* The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting.
5 Feet of -3 Nylon Brake Line.
* 3/16" Nylon tubing.
* 5' Should equip most karts with some left-over.
90 Degree Fitting for Caliper.
* 90 Degree compression hose end.
* 1/8" NPT Female to -3 Nylon hose.
Fog Light Switch for VW Golf MK2
ARP 1352101 12 Point Intake Manifold
Mix me 2745