Speedokote

SMR-207/211

SpeedoKote SMR-207/211 - Hot Rod Black Paint, Black Satin 2K Urethane, SMR-207 4:1 mix Single Stage Gallon kit with activator included

Body Paint

True 2K Urethane Durability
Uniform Jet Black Color
Excellent Exterior Stability from UV Light
Fast Dry
Chemical and Rub Resistant Finish

This sale is for a gallon of satin finish Hot Rod Black Paint (SMR-207) and a quart of activator; which yields 1.25 gallons sprayable. The SMR-207 is a 4.8 lbs/gallon voc (National Rule product). Not for sale in 2.8 lbs/gallon voc areas like California. SMR-207 Hot Rod Black is a 2 component acrylic urethane coating. It mixes 4:1 with a 5-10% optional reduction with Urethane Grade Reducer. This coating is formulated to withstand the same atmospheric conditions as a high quality single stage urethane topcoat. GUN SETUP Fluid Tip psi HVLP Spray Gun 1.3 - 1.4mm 8-10 psi Conventional Gravity Feed 1.3 - 1.4mm 25-30 psi SURFACE PREPARATION: Apply SMR-207 Hot Rod Black directly over primer surfacer that has been finish sanded with 400-500 grit sandpaper. APPLICATION Apply 1 full wet coat followed by 1 medium wet coat. Allow 5-10 minutes flash time between coats. Time to recoat Air Dry 24 hours @ 70°F Bake After cool down Health and Safety: See Material Safety Data Sheet and labels for additional safety information and handling instructions. * Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury. * Follow spray equipment manufacturer's instructions to prevent personal injury or fire. * Provide adequate ventilation for health and fire hazard control. * Follow company, product MSDS and respirator manufacturer's recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory requirements. * Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS. * Always observe all applicable precautions and follow good safety and hygiene practices. Not for sale in California, Delaware or Maryland

A-1 CARDONE 53-4639 Remanufactured Vacuum Booster
Black Motorcycle Halogen Flasher Blinker em00196
Mix me 2299