Southwest Speed
650-6210_013_3901
NEW SOUTHWEST SPEED HYDRAULIC THROWOUT RELEASE BEARING WITH CLUTCH LINE KIT & REMOTE BLEEDER KIT FOR 10.5 STOCK CLUTCHES
Release Bearings
Southwest Speed Hydraulic Throwout Bearing for Stock Style Clutches, as well as a Steel Braided Hose Kit to get to the Master Cylinder and a Remote Bleeder Hose Kit to allow you to bleed the bearing outside the bellhousing (Part #650-6210, #390-013, & #650-3901)
Hydraulic Throwout Bearing: Works with Saginaw, Muncie, GM T-10 & Jerico transmissions, as well as any transmission that has a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380" Will not fit T-5 or non-GM T-10 transmissions Fits stock-style, 10.5" clutches
Includes a set of conical shims to properly fit the bearing Also includes 2 different installation studs, one 5/16"-18 and one 3/8"-16, which will replace one of the bearing retainer bolts in the transmission to hold the bearing in place
You can view and download the installation instructions for this throwout bearing at southwestspeed.com/docs/650-6210Instructions.pdf
Clutch Line Kit: 36" Long, -4 AN steel braided hose with one straight end and one 90 degree end -4 AN to 3/8"-24 fitting with sealing washer for master cylinder Connects hydraulic throwout bearing to master cylinder.
Brand New Southwest Speed Hydraulic Throwout Bearing for Stock Style Clutches, as well as a Steel Braided Hose Kit to get to the Master Cylinder and a Remote Bleeder Hose Kit to allow you to bleed the bearing outside the bellhousing (Part #650-6210, #390-013, & #650-3901).
Hydraulic Throwout Bearing:
Clutch Line Kit:
Remote Bleeder Hose Kit:
If You Don't Buy From Us We Both Lose! ~ SouthwestSpeed.com
Beck Arnley 186-0348 Remanufactured Alternator
Monroe 555944 Gas Magnum Steering Damper
Mix me 3921