ATV Engineering

atvWS278

ATV Engineering 2pc | 4 (2 per side) | 8x6.5 Wheel Adapters Spacers | Ford E-250 Econoline

Spacers

You are buying a set of 2 automotive wheel adapters (and spacers), enough to widen two axles 4.00" total wheel to wheel at 2.00" per side (one spacer in the kit for each wheel on the axle and this comes with lug nuts). The 4.00" ATV wheel spacers are 2.00" per side and will fit most any vehicle with a 8 x 6.5 wheel stud pattern with 9/16-18 studs.

Please measure your studs' distance apart (6.5" spacing on the studs diagonally directly across from each other) first to be sure on your vehicle. There are many applications of the 8x6.5 bolt pattern, but remember to check your studs to be sure!

Highlights of fitment: Many Ford, Dodge and Chevrolet flagship pickup models (i.e. RAM 2500 / 3500, F250, F350, E250, and many more!

For Ford Models specifically:
- E-250 and E-350: 1975 - 2002 (Econoline)
- F-250 and F-350: 1975 - 1998
- F-250 and F-350 Pickup: 1960 - 1974

You are receiving 2 pieces/rings with hole pattern of 8x6.5 or 8x165.1mm. Studs are 9/16"-18 and there is a 130mm center bore. If your lug nuts are different for your wheel, you could need to purchase new lugs. Please check your stud thread pattern! Thickness is 2" per spacer for 4" wheel to wheel.

Our wheel spacers are CNC machined to exact specification from the best quality aerospace aluminum available. Each set is hand tested and commercially packed.

Installation should be professionally done. Follow procedures outlined in the installation document carefully for safety.

We offer a lifetime warranty on all our products. Most other sellers to NOT offer this.

Precision Automotive 28580 Rear Wheel Bearing
Sachs 900 301 Suspension Bellow
Mix me 3658